Optronics Trailer Lights - Clearance Lights - MCL-91AK Review Video

The replacement reverse lock out you are looking for is the part #TK71-755-00. This would allow you to use the same adapters and fittings you have now.

We have the Brake Buddy 32220 reverse solenoid available with the Solenoid Valve Replacement Kit for Titan/UFP Brake Actuators with Reverse Lockouts item #TK71-755-00. I have included a link to this part and also a couple installation and review…

The Replacement Shock for Titan Model 6 and 10 Brake Actuators part #T1242600 only works one way. When the brakes are applied it eases the movement of the trailer forward onto the brake actuator. There is no return spring, the tow vehicle would then…

I went out to our warehouse and measured the Single-Speed Boat Trailer Winch part #315-W2000D for you. The dimensions of the base are as follows; 6-1/4" long x 3-3/4" wide.

In order to upgrade from a 205/75-15 tire to a larger size, the 225/75-15 which is what we offer you will need to account for the reduced clearance. The new size is 1.2" larger in diameter and .8" larger in width but you only need to…

Going from the tire size of 205/75-15 to 225/75-15 is a pretty common change for trailer wheels. There are two things you'll want to verify though. First is that your wheel is either 6 inches wide or 6-1/2 inches wide. Those two widths are the…

The opening at the top of license plate bracket #LP35BB is fairly small and not necessarily designed for a light. The light you put in there would have to be very small. I recommend just attaching a basic light like #LP81BB to the top of the bracket.…

First thing you will need to do is check that all of the wiring of the actuator and your brake controller are correct. I attached a couple diagrams that should be helpful I spoke with my contact at Dexter and there is a way to troubleshoot your…

We've found that typically when the problem you have arises the issue is a blown third brake light fuse as this is same circuit as what activates brake controller with brake pedal. So I would check and see if all of your brake lights come on when…

Yes, you have a couple of ways to test the Dexter DX Series Electric Over Hydraulic Brake Actuator #K71-651. The first test to try is to connect the white wire to the negative post of the battery. Then connect the black wire to the positive post on…

I spoke with my contact at Dexter and there is a way to troubleshoot your actuator. If you use a 12 volt battery and connect just the white wire from the actuator to the negative post and then connect the black wire to the positive side of the…

If the light bulb is disconnected from the socket, there should not be any continuity between the running lights (brown wire) and the ground (white wire). It sounds to me as if you may have a shorted or pinched wire somewhere along in the…