Customers compare MCL95RB to these similar products
Products Featured in this Video
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
I was able to confirm with my contact at Optronics that the mounting post on the #MCL95AB is stainless steel, but the mounting hardware is not.
view full answer...I pulled the 2 trailer lights you asked about so that I could take some measurements you wanted. I have attached a couple of photos with the dimensions noted on the photo. Part #BA65ARRB measures 5-7/16 inches long and 3-3/16 inches wide, and is used…
view full answer...The only way to have clearance lights on your trailer that also flash with the turn signals is to have multi-function light assemblies that feature a separate wire for each the running lights and turn signal circuits. If your existing clearance…
view full answer...Appreciate the photo, and while I couldn't find any reference to part number I550-000, we do have a possible option for the ramp door hinge: - Ramp Door Hinge #PLR1902 The #PLR1902 has a pin that measures 8-3/16" long x 1" diameter and…
view full answer...The #A70GB grommet is meant to fit a 6-11/16 by 2-5/8 inch rough opening. The maximum panel thickness would be right about 3/16 of an inch.
view full answer...We don't have exactly what you are looking for. The #PLR1904-Z you referenced is 3-1/8 inch without the strap. The best other option is the Ramp Door Hinge - Steel #PLR1902 which utilizes as different hinge style and welds flat. It is 4 inches…
view full answer...The Ramp Door Hinge #PLR1902 does require welding of both portions. The tab gets welded as you stated to one side and the outside cylinders get welded to the opposite side. I've attached a couple pictures to assist.
view full answer...On the Mini Thin Line Sealed LED Marker/Clearance Light #MCL-91RK the mounting holes are spaced 2 inches apart on center. I have included a link to a video review of this light for you.
view full answer...The Vanguard II Armored Clearance and Side Marker Light #424600 has a chrome plastic housing but the back plate that attaches to the trailer is metal. The Chrome plating helps resist rust and corrosion. The included gasket helps crate a weathertight…
view full answer...If where you plan to mount the clearance lights is metal that touches the trailer frame then a 1 wire clearance light would work just fine. The difference between the 1 wire and 2 wire lights is that the 1 wire lights ground through their mounting…
view full answer...Yes, the light part #MCL65ARB is the correct replacement for what you sent in a picture of on your horse trailer. The mounting bracket in the picture is the same as the part #A65PB so it's a match.
view full answer...The Optronics Tall Rectangle Submersible LED Trailer Tail Light, part #STL56RB, should work on your Shoreland'r trailer. The same light for the left side of the trailer is the Optronics Submersible LED Trailer Tail Light, part #STL57RB. We have…
view full answer...