Optronics Thinline Amber LED Clearance and Side Marker Light Installation Video

The replacement reverse lock out you are looking for is the part #TK71-755-00. This would allow you to use the same adapters and fittings you have now.

If you installed your Titan Solenoid Valve #T4748800 downstream of your master cylinder for reasons of space it will still operate properly according to my contact at Titan. It does however need to be oriented in one specific direction. The brake…

We have the Brake Buddy 32220 reverse solenoid available with the Solenoid Valve Replacement Kit for Titan/UFP Brake Actuators with Reverse Lockouts item #TK71-755-00. I have included a link to this part and also a couple installation and review…

I don't have a way to look up your axle based on the number you gave me but I can help you pick out the correct replacement axle based on a few measurements. First thing you need is the axle capacity. That would be listed on the axle on a…

When it comes to installing The CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 13 inch Wheels - Qty 2 #CE19503-2 you will need The Mounting Brackets for Trailer Fender - 13 inch/14 inch/15 inch Wheels - Galvanized…

I attached a picture that has the dimensions of the U-bolt part #CE15504A shown so that you can see the inside, center, and outside widths.

The mounting brackets you can use to attach the #CE19503-2 fenders on your trailer are part #PF775-BKT-2. There are 2 brackets in each package. These L-shaped brackets measure 1-1/2 inches wide, and one leg is 7-inches long, while the short leg is…

It looks like you got the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 2 #CE19503-2. Assuming you have 13" wheels you did not order the wrong fenders. However, these do not come with…

The fender mounting brackets to use with the CE Smith fenders part #CE19503-2 are the #PF1135-BKT-2.

While the part number you mentioned does not cross-reference to anything on our end, however I do still have a few options that may work for you. Typically fenders do not have custom mounting brackets so as long as your fenders are for single…

I believe what you are looking for is our part #K12WB2. This has a thread diameter of 1/2 inch, a spline diameter of .54 inch (I know you said .56), and is overall 2 inches. This is our closest option and is a very standard stud seen for trailer…

The studs on the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles part #AKIHUB-545-35-G-EZ-K are 1-5/16" in length. This is generally a good length for this application. So as long as the slip on rotors you are using require a stud…