Customers compare mcl-91ak to these similar products
Products Featured in this Video
Today we're going to take a look at and install the Optronics Mini Thin Line Sealed LED Marker Clearance Light, Part number MCL-91AK. We're going to be installing this on our boat trailer. Here we have the old marker light installed. We need to remove it so we can install the new one. Here we have the side marker light. Securing the old light is a bolt that goes through the light and then through… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
If you installed your Titan Solenoid Valve #T4748800 downstream of your master cylinder for reasons of space it will still operate properly according to my contact at Titan. It does however need to be oriented in one specific direction. The brake…
view full answer...The Replacement Shock for Titan Model 6 and 10 Brake Actuators part #T1242600 only works one way. When the brakes are applied it eases the movement of the trailer forward onto the brake actuator. There is no return spring, the tow vehicle would then…
view full answer...Dexter does not have an option for an electric lockout on their drum brake actuators, but that doesn't mean you can't add one. It is as simple as adding the Replacement Solenoid Valve for Dexter Brake Actuators #T4748800 to the #T4500600.…
view full answer...We definitely have some trailer jacks you can use as a replacement for your Dutton-Lainson but it doesn't look like anything we have will work as a direct replacement. If you'd like to stick with the Dutton-Lainson brand then I recommend…
view full answer...We can get you all the lights you need though it will come in the form of different parts because there isn't a specific "kit" containing everything. For the stop/turn/tail lights you can use the GloLight LED Trailer Tail Light…
view full answer...Usually a grommet-mount incandescent tail light will be pressure-fitted into the grommet and held there simply by friction from the rubber. If there are no visible screws to allow lens removal and no accessible portion of the light's rear surface…
view full answer...I recommend the Optronics LED trailer light kit #TL16RK. The kit includes 2 LED tail lights, 2 amber side marker and clearance lights, license plate bracket, wiring harness and stainless steel mounting hardware. I also recommend getting a deluxe…
view full answer...I pulled the 2 trailer lights you asked about so that I could take some measurements you wanted. I have attached a couple of photos with the dimensions noted on the photo. Part #BA65ARRB measures 5-7/16 inches long and 3-3/16 inches wide, and is used…
view full answer...We have just what you need based on the dimensions you listed. The correct grease seal you need is the part #168255TB which has outer diameter of 2.561 and an inner diameter of 1.687 inch.
view full answer...The Dexter #DX27FR would make a good replacement for trailers weighing less than 7500 lbs. The coupler is compatible with a 2 inch trailer ball, so if your trailer meets those criteria, the #DX27FR would be an excellent choice. UFP is now owned by…
view full answer...We have the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX29FR for disc brakes and the Dexter DX7.5L A-60 Brake Actuator #DX27FR for drum brakes that will be a better option. These will have similar bolt patterns as your Tie Down…
view full answer...Yes, you can add the #T4748800 to the Dexter DX7.5L A-60 Brake Actuator #DX83FR so you have an electric lockout. This is also compatible with the Dexter Hydraulic Brake Line #T0980100 which is perfect for your folding tongue.
view full answer...