Review of Lippert Components RV Awnings - Power Awning Drive Head - LC273478 Video

The Furrion #FMCM15SS is a great appliance that will meet your needs. I researched the dimensions of your original Dometic and discovered they are 29 15/16" wide x 16 7/16" tall x 15 3/8" deep. The Furrion I'm…

To remove the old pin you'll need to remove the cover, remove the two retaining pins, and then slide the old pin out. To install the #LC93FR you'd just reverse the process.

It sounds like you need the Solera Awning Plain Drive Head Front Cover #LC289557 instead of the Replacement Lippert Edge Awning Drive Head Front Cover #LC32NJ you have currently. This cover is wider than #LC32NJ, and is white in color like you…

The idler head is the head opposite of the head with the motor on your Solera RV awning setup. The part #LC672052 is the correct replacement for that.

It looks like the correct replacement head pin for your Solera Awning is the #LC266141. This will work as a replacement for your Solera Awning Idler Head #LC672052. Check out the video linked below for more details on this product. If you have a…

The Replacement Glass Top for Furrion 2-in-1 Range Oven part #C-FSRE21SA-SS-003 is what you need to replace the glass top on a Furrion 2-in-1 Range Oven (FS17WB4A-BL) which is the same as our Furrion 2-in-1 Range Oven part #FSRE17SABL that is now…

The replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System - Qty 1 #LC324269 needs to be torqued to 132 ft-lb and Lippert recommends using some Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz…

Yes, we have a fairly detailed install process to remove and install a power awning head such as the Solera Power Awning Drive Head part #LC273478 which I have attached for you below. If you have any questions on this process please just let me…

Thank you for the picture, I can see the pin is bent rendering your solera head shaft inoperable even though you tried bending it back. Unfortunately, the only fix would be to completely replace the head as this part isn't currently…

I reached out to Lippert and they confirmed you will need the Replacement Drive Head #LC273478. This was thanks to the date on your motor being in 2012.

The Solera Awning Drive Head #LC273478 you mentioned uses the Replacement Head Pin #LC93FR you were looking at. However the matching Idler Head #LC672052 also uses the same Replacement Head Pin #LC93FR.

I did some research based off the information you gave me, I have linked some items below: **Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch - Remote - 2,000 Watts - 12V #PD64FR. *Go Power Industrial Pure Sine Wave Inverter Charger -…