Review of Lippert Components Replacement Parts - RV Awning Support Arm - LC281154 Video

Thank you for the picture of the info tag on your Solera awning arm. Based on that we know that the correct Replacement Short Arm Assembly is the part #LC404523 that you referenced.

I'm so sorry to hear about your bent support arm. We have had a few neighbors who have reached out to us with a damaged inner arm assembly. Unfortunately, the inner arm of Lippert Solera awnings are specially manufactured by a certain amount…

The Reese M5 5th Wheel Trailer Hitch for Ford Towing Prep Package item #RP68FR weighs 204 lbs. This hitch does fit the Ford factory puck system.

While we don't have a way of knowing what awning you have, I can tell you how to choose the right replacement support arms, so long as your awning is a Solera awning. To do so, all you have to do is measure the length of the wall mount, which…

Yes, the Replacement Short Arm Assembly for RV Awnings part #LC404523 is correct for a Solera V000436372 Awning.

Yep! You're looking for the Replacement Short Arm Assembly #LC404523 which is the 63" version of the #LC281154 you had looked at.

I could not locate that exact number (V000613183) but from what I could find, it looks like it comes back to a Solera Awning. If that is the case, then the Replacement Short Arm Assembly for RV Awnings #LC404523 would be the correct replacement for…

Without knowing exactly which awning assembly you have-either 63" or 69"-there could be a number of parts that you might need. You can get just the pitch arm assembly with the Replacement Pitch Arm Assembly for Solera 69" Standard Flat…

We have replacement pitch arms for the Solera 69 inch awning setups like what you have with the part #LC375994 which would be all that you'd need.

The Voyager RV Side Camera #VCMS12RGPR is the correct replacement for your vcms36rgp that you have. This will replace the passenger side camera with no wiring adapters required. We also have the driver side camera #VCMS12LGPR if you want to replace…

Since you were looking at the Regal style idler head #LC672052 I'm assuming you need to replace the idler head pin on your Solera awning. You can remove the old pin and install #LC27WD for a replacement. If by key you mean a cotter pin, then yes…

Thank you for the picture, I can see the pin is bent rendering your solera head shaft inoperable even though you tried bending it back. Unfortunately, the only fix would be to completely replace the head as this part isn't currently available…