Review of Lippert Components RV Awnings - Replacement 1/2 Inch Pin - LC266141 Video

If you are referring to the head pin then yes we do have this available as the Replacement Head Pin for Solera Power Awning Gear Drive Head part #LC266141. That said, you would also want two Replacement Retaining Clips part #LC266137 and one…

The Regal Drive Head #LC53TF is a little skinnier and doesn't have a logo while the Plain Drive Head #LC273478 is a little wider and has the LCI logo on it (see attached).

To remove the old pin you'll need to remove the cover, remove the two retaining pins, and then slide the old pin out. To install the #LC93FR you'd just reverse the process.

Not quite, there is an additional screw below the wax screw in the end cap that also must be removed on the Solera Power Awning Idler Head #LC672052. From here you can remove the roll tube from the drive head. After the drive head is removed, there…

We do have both the parts you are looking for, the replacement head pin, as well as the end cap, and the end cap is available in both white and black so you can choose the correct color. What you need are the following: - Replacement Head Pin for…

I believe you are talking about the head pin for the drive head, and there are replacement pins available, but it does depend on the specific awning you have, as the pins are for certain drive heads (we don't have a way of knowing what awning is…

It looks like the correct replacement head pin for your Solera Awning is the #LC266141. This will work as a replacement for your Solera Awning Idler Head #LC672052. Check out the video linked below for more details on this product. If you have a…

You are correct. The Replacement Head Pin for Solera Power Awning Gear Drive Head #LC93FR is the exact replacement for the bent pin on your Solera awning.

The Replacement Head Pin #LC266141 is for a plain Solera awning system while the Replacement Head Pin #LC93FR fits the Regal Style Solera awning system. I'm not sure what Solera awning you have on your 2016 Keystone Passport Ultra Lite 2920BH but…

In order to remove the old retaining pin from the drive pin on your Solera awning you will first need to remove the cover. The Drive Head Retaining Clip #LC266137 slides into the groove on the Drive Head Pin for Solera Power RV Awnings #LC266141. You…

I spoke with my contact at Lippert and she informed me that the part you are looking for is the part #LC353964. This is a replacement drive gear kit designed to fit the Solera power awning the #LC266149 you referenced fits. The gear by itself is not…

I was able to have the Replacement Head Pin for Solera Power Awning Gear Drive Head #LC93FR pulled from our warehouse and got the following dimensions for you. Overall length: 4-1/16" Length between notches: 1" Distance from pin hole to end…