Replacement Drive Head for Solera Power RV Awnings with Built-in Speakers - Plain Style - Black

See what our Experts say about this Lippert Accessories and Parts

• Replacement Awning Speaker Heads for Solera Awnings
  If you have a Solera awning on your trailer, you can check the connections at the bottom of the speaker awning head, which will be the two pieces at the bottom of the head in the accompanying photo. If they are not working you can replace them with the following, depending on the color you need: - Drive Head: Solera Power Awning Speaker Drive Head - White # LC342147 or Black # LC342149 - Idler Head: Solera Power Awning Speaker Idler Head - White # LC342148 or Black # LC342150
  view full answer...
  
• Does Solera Replacement Awning Head LC342149 Use 2 Pin Wiring Connection
  Yes, the awning motor of the Solera replacement head part # LC342149 does use a 2-pin bullet style connector like you have now. The speaker wires are a spade connector but the motor is what you mentioned having.
  view full answer...
• Solera Awning Head Covers that have Speakers Built In I just o
  Here are the front and back covers for the Solera awning heads that have speakers built in. Replacement Solera Awning Speaker Drive Head Front Cover - Black # LC731463 Solera Power Awning Speaker Drive Head Back Cover, Black # LC300009 Replacement Cover for Solera Power Awning Speaker Idler Head - Front - Black # LC354189 Solera Power Awning Speaker Idler Head Back Cover, Black # LC300011 You can also replace the whole head unit if needed with these parts: Solera Power Awning Speaker...
  view full answer...
• Replacement Front Cover for Solera Power Awning Idler Head
  We do have replacement covers for your Solera Power Awning idler head such as part # LC672052. What you need is the Solera Awning Plain Idler Head Front Cover # LC289566. If you have an idler head with a speaker such as Solera Power Awning Speaker Drive Head # LC342149 what you need is the Replacement Cover for Solera Power Awning Speaking Idler Head - Front # LC354189.
  view full answer...
• Replacement Driver and Idler Head Covers for Solera Awnings with Speakers
  The wires you're seeing are for the speakers in your Solera awning, but the easiest way to tell is by which side it's on when you're looking directly at the awning from the front. If it's the left side it's the idler assembly and the right side is the driver head assembly. I've linked the potential replacement parts you may need below. Replacement Solera Awning Speaker Drive Head Front Cover - Black # LC731463 Solera Power Awning Speaker Drive Head Back Cover, Black # LC300009 Replacement...
  view full answer...
• Replacement Solera Awning Speaker Driver Head Front Cover
  The Replacement Solera Awning Speaker Driver Head Front Cover # LC731463 referenced in your question is designed to replace the black front cover on the Solera Power Awning Speaker Drive Head # LC342149. If this is what you have and the back drive head cover is still in place then this should be all that you need.
  view full answer...
• Lippert Solera Awning Plain Idler Head Front Cover Screws for Removal
  A standard Phillips head screw would be all that you'd need to remove the cover of the Solera Power Awning Idler head.
  view full answer...
• Tip for Using Solera Power Awning Head Speaker After Rain
  That's a bummer your speakers stopped working after getting wet. They are supposed to be weatherproof and will keep working after getting wet within reason. We don't have any type of cover we can recommend for them but best option would be to not use the speakers directly after getting wet and letting them dry out a bit before use.
  view full answer...

Do you have a question about this Accessories and Part?