Customers compare LC351396 to these similar products
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The best way to confirm the weight capacity of your Dexter Torsion Axles is to find the lot number on the axle tag which is located on the center of the axle on the rear side. This tag should say Dexter Axle and then a 9 digit number. The number…
view full answer...To convert your Dometic manual awning to a power unit, you can use the Solera 12V Conversion Kit in Black #LC434723 or White #LC434724 if you have a manual crank system. These Solera kits are compatible with Dometic (A&E) awnings like what…
view full answer...The Solera Manual Pull Style to Power Awning Conversion Kit, White #LC329250 is a nice upgrade. I've attached some photos of the installation instructions for the parts exchange and the wiring of the unit.
view full answer...Yes, we have a fairly detailed install process to remove and install a power awning head such as the Solera Power Awning Drive Head part #LC273478 which I have attached for you below. If you have any questions on this process please just let me…
view full answer...Yes, the 921 LED Bulbs #ARC48FR would be a compatible replacement for a JRP1007B light bulb. With this light being LED it will have a lower wattage and amperage draw for a cooler, brighter light that requires less energy to run.
view full answer...I took a look at what Lippert and ourselves offer as replacements for the Lippert Solera awning, and the outer cover for the arm that you mentioned is actually offered as a replacement part. Instead, to replace that piece, you're going to…
view full answer...I reached out to Lippert and found out what you have cross references to the Solera Electric RV Awning Conversion Kit part #LC351396. This can then be paired with a fabric/roll tube of your choosing such as the 20' Wide Roller w/ Fabric for…
view full answer...The replacement arms you need for the Solera XL Power Awning are part #LC362243. All of the Solera XL Awnings we carry have 78" arms. To get the measurement for the arms that you need Solera recommends measuring the distance from the awning rail…
view full answer...The Solera awning components like the Solera Manual Pull Style to Power Awning Conversion Kit #LC329250 that you referenced are designed to fit the standard brackets etc. found on campers. You would be able to easily reuse the same hardware on your…
view full answer...I'm so sorry to hear about your bent support arm. We have had a few neighbors who have reached out to us with a damaged inner arm assembly. Unfortunately, the inner arm of Lippert Solera awnings are specially manufactured by a certain amount of…
view full answer...To remove the old pin you'll need to remove the cover, remove the two retaining pins, and then slide the old pin out. To install the #LC93FR you'd just reverse the process.
view full answer...You can use this #LC329250 conversion kit if you have a pull style manual awning. These Solera Kits are compatible with your Dometic awnings and everything you need is included with the kit. I've provided a video for you to check out!
view full answer...