Lippert Components Trailer Suspension LC283271 Review Video

The 052-003-00 number on your current shock is the part number from Dexter Axle. We don't carry the direct replacement but if the specs match for the Lippert Standard Replacement Shock #LC283271 and the axle this is being applied to is a…

Lippert Components Heavy-Duty Replacement Shock - Yellow #LC283280 are what you will need as replacement shocks. They are 8.625 inches completely compressed and 13.5 inches completely extended so under weight they likely will be right at your 11 inch…

I'd recommend sticking with what you've got currently. If the shocks feel a little light they may be worn and need replacing. The 052-003-00 part number you gave comes back to a part number from Dexter Axle, and while we do not carry a direct…

I will be happy to explain how to install the shock kit #LC281281. In addition to the instructions below I have also included a picture of the actual instructions. 1. Raise trailer and jack up the axle to release pressure on the springs. 2. Remove…

There is no YMM fit guide for the Replacement Dexter Bolt-On Shock Kit #K71-697-00 so I won't be able to say for certain, however if as long as you have either 2-3/8" or 3" diameter axles with 1-3/4" wide springs these'll fit.

The correct shocks for a 2020 Jayco Eagle HT 28.5RSTS with shock prep is the Replacement Dexter Bolt-On Shock Kit part #K71-697-00. You'll need one kit per axle.

We have the exact size you are looking for with the Lionshead Lug Nut #LHLR103 which is for a 1/2 inch diameter wheel stud and has a 3/4 inch outer diameter. I would not recommend the lug nuts you referenced as they most likely would not fit into the…

I went and pulled a Americana Trailer Wheel Lug Nut #AM90070 from our warehouse to get the dimension you are looking for and found that the angled section measures 3/8 of an inch.

We have the Americana Trailer Wheel Lug Nut - 7/8" Diameter - Stainless Steel - 1/2" - 20 #AM90070 which have the same look, threading, and outer diameter. The length of the nut is the only difference. Your current lug nuts are 1-7/8 inches…

Since you are concerned about dips, RRs, and bumps in curves, I recommend using a shock absorber like #LC283271 or #LC281281 on your 5th wheel trailer. You stated the mounting hardware is already in place, so adding shock absorbers should be easy and…

The Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K #23-468-469 are not designed to be manually adjusted in the way you are describing. There isn't really a way to back off the adjustment because…

I wasn't able to find any specific information on your 2015 AML Auto Hauler open trailer with tandem 5,200 lbs axles current suspensions. There isn't a database I can look at and tell you exactly what part number you will need. The Lippert…