Customers compare AM3S160 to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The best option we have for you is the 3-Leaf Double-Eye Spring part #e84SR with the Single-Axle Trailer Hanger Kit part #APS4. This option will replace the leaf springs and leaf spring hanger brackets which is needed because the new double eye leaf…
view full answer...Trailer or automotive wheels can have a positive or negative offset. The offset refers to the distance between the mounting surface of the wheel that touches the hub and the center line of the wheel, as shown in the diagram I have edited for you. A…
view full answer...When you test the 4-Way on the Curt T-Connector Wiring Harness, part #56016, at the rear of your vehicle, it should show now power on all 3 pins with the lights off. If you have the vehicle head lights on, you should have around 12 volts at the brown…
view full answer...If you are looking to replace your flat-end style slipper springs with a radius-type, you can use the same hangers you have only if they will accept the same size bolt as the radius-type springs. Otherwise you will need to get a new set of hangers…
view full answer...There are no U-bolts to attach the slipper part, I recommend replacing your slipper springs with double eye springs. In order to do this you need to know the weight rating of your axle as well as the length from center eye to center eye so you can…
view full answer...The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
view full answer...I went out in the warehouse and pulled the Redline Grease Seal, part #13194. It does have the markings on the inside of the seal that say TCM 13194 TM Taiwan and the number 11. It also has the spring around the inside lip. This seal will work for…
view full answer...Upgrading from your 4.8-12 size tires to radial 6 ply 5.30R12 units like the Taskmaster #TT53012C is a great idea for better traction and cooler operation on highways. The new tires will fit your existing wheels without a problem and there really…
view full answer...Typically the only thing that limits a trailers speed rating is the tires, so replacing the tires with ones that have a higher speed rating is likely all you need. Based on the information I could find on your 40x48 Ironton Utility Trailer it uses…
view full answer...Yes, a galvanized wheel will resist rust and corrosion better than a painted/coated wheel. This will apply to both the bead seat and face. In regards to cost, if you do not have access to a tire mounting machine or the means to use one for that…
view full answer...Given the size of your trailer, I don't believe any of the off-the-shelf axles we carry would be short enough for your needs. If you can send me the hub face to hub face dimension and the center to center spring seat spacing, I'd be happy to…
view full answer...While there are stock axles that are close to the measurements you mentioned, there is not one that's an exact match to the existing axle on your Harbor Freight trailer; in order to get an exact match you'll need to special order a…
view full answer...