Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM31952 Video

Even when stored in the somewhat controlled environment of a garage, tires are still subject to dry rot and flat spotting. Even if the tire tread has plenty of depth left and you can't see any cracking with the naked eye, the generally accepted…

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

I reached out to EZ Loader to verify the correct parts for your boat trailer. They informed me it uses the Bearing #L44649 for both inner and outer and a grease Seal #34823 with a 1.249" inner diameter. The CE Smith Trailer Idler Hub Assembly…

Because the size of both tires is so similar, you can certainly use the #AM31952 as a replacement. An ST185/80-13 tire will typically be slightly larger in diameter and width than an ST175/80-13 tire, but only by around 1/4 inch. Although the…

It does sound like your bearings are a #L44649 (1.063" inner diameter). If they are original to the trailer they may be pretty worn, which is why your measurements may be off by a few hundredths. Also the seal #34823 that can be used with the…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

The best boat trailer tires and wheels we offer with a 5 on 4-1/2" bolt pattern and a 175/80-13 radial load range C are sold separately and will need to be mounted when they arrive. I recommend the tire: Provider ST175/80R13 Radial Trailer Tire…

I went out in the warehouse and pulled the Redline Grease Seal, part #13194. It does have the markings on the inside of the seal that say TCM 13194 TM Taiwan and the number 11. It also has the spring around the inside lip. This seal will work for…

By looking at the photo you provided, I can see that you do indeed have a clearance problem with the fender. Going to a 13 inch wheel/tire combo like the Kenda Wheel/Tire Combo part #AM31990 for a black mod wheel or #AM31991 for a white mod wheel…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

For a standard axle we have the Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern #e25GR which is rated for 2,000 lbs but the spring seats are 48" apart on center so for this to fit you'll have to cut off the current sets and have new ones,…

If your 1983 Calkins boat trailer is rated for 2,375 lbs GVWR (Gross Vehicle Weight Rating) then the Loadstar ST175/80D13 Bias Trailer Tire #AM3S140, which has a load range C (1,360 lbs at 50 psi), will be able to handle the weight. I am not sure how…