Review of JR Products -Standard Hitch Clip - 37201011 Video

I recommend the Curt Trailer Hitch Receiver #C12118 on your 2015 Kia Cadenza. This hitch has a tongue weight rating of 350lbs and 3,500lb trailer rating. You will want to ensure that you do not exceed the weight ratings given by the manufacturer…

For your 2014 Kia Cadenza, the Curt Trailer Hitch Receiver Class II - 1-1/4", #C12118 is a confirmed fit. The hitch will come with all the installation hardware you need as well as installation instructions. For any non-trailer load like…

Yes, you can use a hitch adapter like the 1-1/4 Inch to 2 Inch, #HTAD, in the Curt Trailer Hitch Receiver, #C11158, to allow you to use the cargo carrier/basket for the 2 inch hitch. In addition to the adapter you will need hitch pin and clip #PC2…

The best option I have for you is to use the MaxxTow Ball Mount part #MT70066 which will raise the cargo carrier another 6" off the ground. The reason I recommend this option over other adapters is because it will not reduce your tongue…

For a similar hitch cover that would fit a 2 inch hitch like the part #C22271 that you referenced you would want the part #C22272 instead.

You can add a license plate holder and light to your ramped utility trailer either with a single item such as #LPL55CB or #PM436B, or you can choose separate plate holders and lights to let you choose the designs you most prefer, such as plate…

I don't have any information specific to any one particular trailer but what I can tell you is that most license plates are mounted under the driver side tail light. In fact, most driver side tail lights even have a bracket for the license…

I have a solution for you. As far as the load rating of the single Stallion Loading Ramp - Steel - 48" Long x 11" Wide #288-07474, it has a weight capacity of 800 pounds. However, when you use the ramp as a pair like the 2 that come…

In regards to loading ramps like the Loading Ramp part #288-07474, the length includes the lip/tabs on the top or bottom.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I spoke with my contact at Snowsport about the Hold Down Strap, #A60220. He stated that the strap does not have a specific weight capacity but it is strong enough for its intended purpose This strap is designed for use with Snowsport ATV, UTV, ZTR,…

The Agri-Cover SnowSport Hold Down Straps #A60220 are not absolutely necessary to use with a SnowSport snowplow. What they give you that is special compared to other ratchet straps is that they are designed for use with a SnowSport, making them…