Trailer Hitch Receiver for Towing With a 2015 Kia Cadenza
Question:
Trailer hitch for Kia cadenza Do I need to change my rear shocks for towing?
asked by: Ernie
Expert Reply:
I recommend the Curt Trailer Hitch Receiver # C12118 on your 2015 Kia Cadenza. This hitch has a tongue weight rating of 350lbs and 3,500lb trailer rating. You will want to ensure that you do not exceed the weight ratings given by the manufacturer for your vehicle. This will not require you to change your rear shocks. If your suspension is sagging you should check that the weight on the trailer is distributed properly across the trailer and you do not have to much tongue weight. You typically want 10% of the trailers weight to be on the ball. To much weight will lift the front of the vehicle and lessen steering and braking. To little weight you will cause the trailer to sway uncontrollably.
For towing you will need the Curt T-Connector Vehicle Wiring Harness # C59496 to give you the electrical connection for the lights on the trailer. A Curt Class II Drawbar # C45522 with 1-7/8" Ball # C40001 or 2" Ball # C40018 will give you the physical connection.
The Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set # 3794DAT will allow you to lock the drawbar in your receiver as well as have locks for the trailer coupler when you are towing and when the trailer is disconnected.
Products Referenced in This Question
Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set - 1-1/4" and 2" Hitches
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Unique
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Bent Pin
- 2 Inch Span
- Master Lock
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-5/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Class II Drawbar - 3-1/8" Rise - 11-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: etrailer Hitch Pin Alignment Collar Review
- Shop: Trailer Hitch
- Video: Brophy Hitch Adapter Review HT5R
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise
- Q&A: Recommended Trailer Hitch Receiver And Wiring For 2014 Kia Cadenza
- Search Results: pins
- Search Results: e~track straps
- Q&A: Adapter Needed to Use Cargo Carrier for 2 Inch Hitch on 2014 Ford Focus w/ 1-1/4 Inch Class I Hitch
- Video: MaxxTow Ball Mounts - Fixed Ball Mount - MT70066 Review
- Video: Review of JR Products -Standard Hitch Clip - 37201011
- Video: Review of Trimax Locks Hitch Pins and Clips - Hitch Pin And Clip For 2 Inch Hitch - TMX33VR
- Shop: Trailer Wiring
- Search Results: tow bar
- Q&A: How to Raise a Cargo Carrier on a Minivan for More Ground Clearance
- Shop: MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
- Shop: Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Shop: Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: 2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Video: Choosing the Right Trailer Wiring
- Video: Brophy Hitch Adapters - Hitch Expander - HT5R Review
- Search Results: hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer hitch
- Article: My Trailer Hitch Doesn't Fit
- Shop: Brake Controller