Review of TowSmart Multi Ball Mount TS74FR Video

Where to start with your wiring harness depends on what available connectors you have under the bumper of your 2020 Ford F-150 and also what trailer connector you're looking to add on your truck. If your truck already has the square shaped…

I do have a simple solution for you which will prevent damage to the trailer hitch but there's really nothing else you can do short or raising the vehicle or leveling the driveway, neither of which we can help with. That said, what we can offer…

Standard trailer wiring circuits on 7-ways like the part #C58155 and #PK12706 are rated for up to 40 amps so if you wanted to use a 7-way like this to power a horn that is rated for 13 amps you certainly could.

I confirmed with my contact at Curt that the spring bars of the Curt Trunnion Weight Distribution System part #17302 is 30-5/8 inches. You are also correct about the Curt Short-Arm Systems as they have 28-5/8 inch length spring bars. I attached an…

The L-brackets of the Reese weight distribution system #RE44FR need to install between 24.5 and 27.5 inches from the hitch ball center. I attached a picture that I took from the instructions that shows this. The range gives you a bit of flexibility…

Convert-A-Ball doesn't offer their Interchangeable Trailer Ball Sets with a 1-1/4 Inch diameter. If you're wanting to use a ball mount with a 1-1/4 inch hole for the trailer ball, you could use a Hitch Ball Bushing like #58184, which would…

I spoke to my contact at Convert a Ball and he informed me that the nut of the Convert a Ball 3 Ball set part #902B needs to be torqued down to 120 ft lbs. We have a torque wrench that would work part #ALL944001.

The size wrench you would need to tighten the nut of the Convert a Ball part #906B is 1 inch.

According to Convert-A-Ball you need to torque the Convert-A-Ball Shank - 1" Diameter #106B to 120 ft-lbs. I recommend picking up the White Grease Hitch Ball Lube #58117 to keep the hitch ball greased and operating properly.

I've attached a portion of the instructions for the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers #K71-359-00 that will give your the torque value of 30-50 ft lbs for the hangers, the equalizers, and the shackle straps.

I would be happy to recommend a ball mount for your Ram 1500 4WD with air bags installed, but the correct ball mount is really going to come down to how much of a rise/drop you need to tow your trailer level. To determine the rise/drop you need you…

This will depend on the hitch used and the height of the trailer coupler. You want the trailer to be as level as possible. We have a page on calculating hitch height and coupler height to help you find what ball mount would work best. Most light duty…