Flo Tool Wheel Chock and Jack Stand for Tandem Axle Trailers Review Video

It depends on what 5th wheel landing gear you have. For example; the Lippert Landing Gear part #LC333966 is rated for 6,000 lbs. It can be used with a trailer that weighs more than 6,000 lbs because it is only supporting part of that load - the…

For the 6-point Level-Up System by Lippert, I made a call to the manufacturer to ensure you would receive correct information. Lippert said that when you bolt the footpads to the jacks, you need to torque them to 132 ft-lb. They said to make sure…

You can absolutely trust the manufacturer ratings for the ball mounts we have available, regardless of whether or not they feature a solid or hollow shank. Ball mounts and other towing products are typically tested well beyond their actual listed…

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

Thank you for the photo, and though we have tail lights that will work for you there is unfortunately no database with each part number for each year, make and model of trailer that would allow us to look up what you might have. Instead, you will…

We installed the CIPA towing mirrors part #CM11980 on a similar 2017 Nissan Titan as yours and we found they fit and worked well. We also installed the #11953 on a 2017 Nissan Titan and they worked well too. If you scroll down you'll see the two…

The most common lug nut socket sizes for trailers are as follows; 13/16", 7/8", 17mm, and 19mm. I would be willing to bet you need a 13/16" socket but in order to be sure you get the correct size you should consider the Telescoping Lug…

The difference between the letter R and D in the tire size you mentioned has to do with the construction of the tire. R stands for radial and D stands for Bias Ply. The main difference between a radial ply and a bias ply tire is how the tire is…

I would not automatically assume your trailer has a weight capacity of 20,000 lbs or more with two 10,000 lb axles. You must also consider the weight of the trailer itself and the Gross Vehicle Weight Rating (GVWR) of the trailer. The GVWR is the…

I don't have any information specific to any one particular trailer but what I can tell you is that most license plates are mounted under the driver side tail light. In fact, most driver side tail lights even have a bracket for the license plate…

For a similar hitch cover that would fit a 2 inch hitch like the part #C22271 that you referenced you would want the part #C22272 instead.

You can add a license plate holder and light to your ramped utility trailer either with a single item such as #LPL55CB or #PM436B, or you can choose separate plate holders and lights to let you choose the designs you most prefer, such as plate holder…