Review of Gen-Y Hitch Trailer Hitch Ball Mount - Adjustable Ball Platform - GY59VR Video

I have a solution for you. You will want the Gen-Y Phantom X Adjustable Ball Mount w/Stacked Receivers item #GY59VR. This adjustable ball mount will give you the ability to carry up to 700 lbs of tongue weight. It has 5 different height options for…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I recommend the Gen-Y Phantom X Adjustable Ball Mount w/ Stacked Receivers for 2" Hitch #GY59VR. This will give you the ability to carry up to 700lbs of tongue weight and will spread out your Thule bike rack and a 60x24 etrailer Cargo Carrier…

Most ball mounts, like the Draw-Tite #2753 can be used in both a rise (upside down) and drop (standard) position. I'm not seeing any Curt ball mount with a part number 45836, but as I mentioned, most ball mounts are designed to be used either…

As long as you do not exceed the tongue weight capacity of the #GY87VR it could handle your bike and bike rack. This has a tongue weight capacity of 700 lbs so it won't be a problem. However, if you think you might tow your popup camper and also…

When trying to determine leveling for a trailer and the tow vehicle, the connection should be within 1-1/2 inches of height. As long as you are within this height, it will be safe to travel. If the connection is way off, the best bet is to use…

Sounds like you are looking for the Hitch Adapter part #MPG544. This is a dual hitch adapter that has a lower hitch opening that has a 6 inch drop like you'd need.

The only Aluminum cargo carrier we currently carry close to 24" x 60" would be the 30x50 Curt Cargo Carrier #C18112. This cargo carrier only has a slight rise in the shank and comes with a 48-1/8" long folding ramp. The shank also…

You will need a Peterson Replacement Lens, part #440-15R. This is the replacement lens specifically designed to fit the Peterson 440-15 Utility trailer tail light lens like the one you have. You will have to use the screws to install the new lens.

There is one rack that will work for your electric bikes, the Hollywood Racks Sport Rider SE #HLY84FR. I contacted the manufacturer to confirm that this rack is going to be compatible with your Mercedes-Benz Leisure Travel on a Sprinter 3500 chassis,…

I have a solution for you. The Hollywood Racks Sport Rider SE Bike Carrier for Electric Bikes, #HLY84FR, is the bike rack I recommend. The Hollywood Racks rack is a two bike rack that is designed to carry the heavier weight that many electric bikes…

You can get a load range E in an ST225/75-15, #TR225LRE. This tire is rated for 2,830 pounds at 80 psi. It has a ply rating of 10. It is important to inflate the tires to the maximum psi to reach the maximum capacity. It will also help the tires run…