Review of Dexter Axle Trailer Hubs and Drums - Hub with Integrated Rotor - K08-435-05 Video

Hi Wendell, We do offer compatible replacement hub/rotors for your Dexter 008-435-05 but they unfortunately do not come pre-greased. I recommend picking up the #K08-435-05 as well as bearings #L68149 and #L44649, and grease seal #RG06-050 to pre-pack…

Looks like you have a spline diameter of .56 inches and and threaded portion of 1/2 inch which is very popular. For that you'd want the part #K12WB2. I attached a picture that has a dimensional diagram for you to check out as well.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

Yes, you can keep your oil bath hubs and use the Kodiak disc brakes; you mentioned a salt water environment and stainless steel brakes so you have two options, with the all-stainless steel being the best in terms of corrosion resistance, as you can…

The VIN doesn't give me really any information beyond what you already gave so I reached out to the manufacturer. You have the 3,700 lb axle, but it has the standard 3,500 lb spindle size based on the bearing numbers they gave me for your axle. I…

We don't have the UFP Brand, but I can give you some compatible parts. For your trailer hubs with rotor, I recommend the Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs #KHR10D. You will need grease seal #RG06-050 along…

The Titan 10" Hub and Rotor #K08-435-05 that you referenced can be used with EZ lube spindles. In order to do that you'd need to use the correct grease caps and you'd be set. For that all you need is the part #RG04-040 which has the…

Thanks for getting me the bearing numbers and bolt pattern of your hubs. With that info we know that the Kodiak Hub/Rotor part #KHR10D or the Dexter part #K08-435-05 would be what you need.

The Dexter 10" Hub-and-Rotor Assembly part #K08-435-05 works with the Grease Cap part #F001518.

The rotors included with the Kodiak 12 Inch #K2HR526DS Disc Brake Kit you referenced can easily be converted from grease to oil bath hubs by using the the Kodiak XL ProLube kit part #XLPROLUBE2440KIT. The ProLube kit includes 2 oil caps, two oil…

I did some looking and found that the 46210 and 46845 hubs you currently have use the same #L68149 inner bearing and #L44649 outer bearing. However, as we do not carry the Tie Down Engineering Vortex hubs, I cannot say what all will fit them,…

Galvanized metal parts are definitely better if your application is salt water use. We do offer a galvanized hub/drum assembly in the 3500-lb axle rating and with the 5-on-4-1/2 bolt pattern you need. Hub/drum kit #8-247-50UC3 includes the bearings…