How Tall is Curt Rockerball # C40047 Above Ball Mount Platform

Question

Question:

What is the height of the ball from base to top of ball?

asked by: Stephen B

0

Expert Reply:

From the base of the # C40047 up to the top of the ball measures 4.091 inches. This is about 1-3/8 inches taller than a standard ball.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver…

view full answer...

Answer 2

The Curt Rockerball Shock Absorbing Hitch Ball has anti-Rotation Plate that is not compatible with all hitch mounts. This hitch ball is recommended to be mounted onto standard ball mounts not shock absorbing ones. I recommend the Curt RockerBall…

view full answer...

Answer 3

Yes, the RockerBall and channel style ball mount you asked about are absolutely compatible: - Curt RockerBall Shock Absorbing 2" Hitch Ball #C40047 - Curt Channel Style Adjustable Ball Mount #C45901 The reason is, the ball mount accepts a hitch…

view full answer...

Answer 4

Your 23575R15 tire has an overall diameter of about 29-inches and a width of right around 9-1/2-inches and we have lots of suitable spare tire covers you can choose from. Just click on the link provided to see the various colors and themes available…

view full answer...

Answer 5

A 235/75-15 tire like what you have would measure right at 29 inches in diameter. So for that we have the CE Smith cover part #CE27440 which would fit and work well for an all black cover. I also attached a link to a page that has all of the spare…

view full answer...

Answer 6

Curt offers a solution that would provide additional shock absorption to help isolate the tow vehicle from the shock the trailer experiences on bumpy roads, while still allowing you to use your existing #C45250 ball mount. The Curt #C40047 RockerBall…

view full answer...

Answer 7

The Curt #C84WR is 2-3/4 inches wide at the ball platform, so it won't work with your #C40047 Curt RockerBall. This being said, we do offer a ball mount with a similar rise/drop with a 1 inch diameter ball hole that would work. I'd recommend…

view full answer...

Answer 8

Curt hitch ball #40038 has a 1 inch diameter shank. For Curt balls with 3/4 or 1 inch diameter shanks you would use wrench #C20001. The nut on that ball should use the 1-1/2 inch end of the wrench. You could also use a large crescent wrench if you…

view full answer...

Answer 9

I have included a link to the installation instructions for the Curt RockerBall Shock Absorbing 2" Hitch Ball #C40047 below that will give you the correct torque specification. Be sure to follow the specifications listed in step 2 to ensure the…

view full answer...

Answer 10

Going with the #C40047 Curt Rocker Ball will help isolate some of the clattering and banging from the surge coupler, and it will also help dampen some of the road shock you experience. What it won't do is help with the movement of the ball mount…

view full answer...

Answer 11

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 12

The hitch height of the Curt #C13406 on most 2017 Toyota RAV4 is going to be 15" from the top of the receiver to the ground, but this is going to vary slightly from vehicle to vehicle depending on the suspension condition. I've linked our…

view full answer...

How Tall is Curt Rockerball # C40047 Above Ball Mount Platform

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching