Review of Curt Trailer Hitch Ball Mount - Fixed Ball Mount - C74WR Video

The B78-13 tires you mention convert to metric size 175/80-13. The 175/80-13 tires are available in three load ratings. B: 1100 lb at 35 psi C: 1360 lb at 50 psi D: 1610 lb at 65 psi You would choose the load rating based on the capacity of your…

In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I attached…

Yes, the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter #TK55VR is specifically designed to be used on your 2021 Ford Bronco Wildtrack that did not come with a factory tow package. This kit will allow you to install the…

There are two different tail light bulbs types on a 2022 Ford Bronco, LED and incandescent. If you have LED then you need the Curt T-Connector Vehicle Wiring Harness part #C42WR or if you have incandescent then you need the Curt T-Connector Vehicle…

Since you'll be moving the trailer around by hand on a paved surface, you really wouldn't need a double wheel jack like the Fulton #F27CR. Dual wheels would actually make the trailer a bit more difficult to maneuver around by hand on a paved…

I went ahead and checked out the SeeLeveL Sensor for RV Holding Tank Monitor #SE78VR and unfortunately they are not going to be compatible with metal tanks. These sensors will work on most plastic or polyethylene holding tanks that contain…

We have the 710-AR and 710-ES2 SeeLevel sensors, though I was unable to find any 701AR or 701ES2. If you were referring to the 710-AR and 710-ES2 you would need the following: - 710-AR: SeeLeveL Sensor #SE88VR - 710-ES2: SeeLeveL Sensor #SE78VR

The center to center for the holes on the Demco Spare Tire Carrier for Bolt-On Swivel Jack part #DM15853-52 is 5.5" this is the side to side dimension you mentioned. I have also linked the video giving more in depth specs for you to check out.

Yes, you can hook up a power inverter to input one and then shore power to input two on the Furrion Automatic Transfer Switch part #F30ATS. The dip switch will then need to be in the off position in order for the power to transfer instantly without…

I noticed in the details that they say, "Switches from shore power, or an inverter, to a generator automatically when available. So, in the case that you unexpectedly lose shore power, the switch will automatically begin to run power to your…

The Stromberg Carlson Ladder #LA-401 (Or #LA-401BA in black) is 99-1/2 inches tall and has 250 pound weight capacity. It's also hinged. If the 99-1/2 inches is a little too long for you the ladder can be trimmed to fit your needs.

The Replacement Rung for Stromberg Carlson RV Exterior Ladder measures 13-1/4" overall length. The diameter of the hole is 1". From the center of one of the holes to the other hole is 11-1/4" and the measurement between the holes is…