Review of Fastway Replacement e2 Weight Distribution System L-Pin - FA92-03-9205 Video

I went out to our warehouse and measured the Replacement L-Pin for Equal-i-zer 4,000-lb Weight Distribution Systems #90-03-9460. The length of the long side is 2-1/2" long, the short side measured at 1-1/2" long and the thickness of the pin…

I was able to go out to the warehouse and measure the Replacement L-Pin for Fastway e2 Weight Distribution Systems #FA92-03-9205 for you. I found that the square stock is 5/8 inch by 5/8 inch. The measurement from the pin hole to the bend is 1.64…

There are some Dutton-Lainson trailer jacks that are made in the USA as well as a few that are not. Any jacks that we carry that are made in the USA have that as part of the description to help set them apart. Currently we have the following options:…

According to the Lippert Service Manual for the Lippert Electric Trailer Jack #LC285318. "Maintenance 1. Before each use, inspect the Power Tongue Jack and replace if bent or damaged. 2. If wiring is connected to battery terminal, inspect at…

I do have an option for you, however the Replacement L-Pin #90-03-9460 referenced in your question is only rated for the 4,000 pound Equal-i-zer Weight Distribution Systems like #EQ37040ET. For your higher-rated 6,000 pound system, you will instead…

Thanks for getting me the capacity of your Fastway e2 weight distribution. Since we know it's a 1,000 lb tongue weight system the correct L-pin replacement is the part #FA92-03-9205.

If your RV step's motor is dead (no operation even if you bypass the switches and directly apply 12V power to the motor terminals) then it will require replacement. Your gearbox may still be okay so long as it has not made bad noises when it last…

In order to reduce the squeaking you will need to do some lubrication; I recommend using the Equal-i-zer High-Performance Lubricant #EQ91-00-4250. You will want to apply this to your spring bar sockets, hitch ball and weight distribution head, though…

The owner's manual for the 2014 Ford F-150 only shows the gross combined weight rating which is the most that the truck and trailer can weigh together. So I checked the towing guide from Ford for the 2014 model year. Capacity is also dependent…

Yes, we do sell the pins which secure the spring bars onto the frame brackets. That said, these aren't universal so we will need to know which exact system you have. For example, if you have a Equal-i-zer then you'd need the Replacement…

Yes, I would recommend keeping the bolts of the #AP233 lubricated. An easy way to do this is to use wet bolts like part #126B2 which have a zerk fitting that allows for easy application of grease to them.

I edited a picture to show measurements for this Replacement L-Pins #EQ95-01-9430. This pin will work with Equal-i-zer weight distribution systems rated for 6,000 lbs - 14,000 lbs GTW. I hope this helps.