Customers compare FA92-01-1099 to these similar products
Products Featured in this Video
Today, we're going to be taking a look at part #FA92-01-1099. These are going to be your Replacement Trunnion Spring Bars. These are going to work with the E2 weight distribution systems. They have a maximum tongue weight of 1,000 pounds. Now when installed your trunnion spring bars are going to flex appropriately over uneven terrain, offering a nice controlled even ride without all the bounce.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hey Francois! The replacement arms you're looking for can be found as part #FA58FR on our site. These are rated for the 4,500 lb system and it comes with both arms. Let me know if you need anything else so we can get you back up and towing!
view full answer...You will definitely want to go with the 1,000 lb. bars #FA92-01-1099 rather than the 800 lb. bars #FA92-01-0899. It is better to go with a system that can support you while you are at your heaviest, and deal with what could be a slightly more stiff…
view full answer...You would want to upgrade your spring bars as your tongue weight is most likely higher than what your current system is rated for. For that all you need is the #FA92-01-1099 and you'd be set. This will replace your current spring bars with ones…
view full answer...To swap out the 800 lb tongue weight spring bars of your E2 system to 1,000 lb spring bars you would want the part #FA92-01-1099.
view full answer...When changing the spring bar rating of a Fastway e2 weight distribution system like you are wanting to do with the part #FA92-01-1299 you do not have to change to a different head. So all you need is the upgraded spring bars and you'd be set.
view full answer...To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.
view full answer...We have spoken with Progressive Dynamics in the past with this question before and while I have a solution for you there is no replacement convertor that will allow you to upgrade to lithium batteries. The best way to upgrade your WFCO model WF-8955…
view full answer...All weight distribution system parts, except for the shank component that fits into your hitch, are proprietary and brand-specific. You could mount a Curt WD head on a Reese shank (or the reverse) but the spring bars and other parts need to be from…
view full answer...Yes, you'd want to replace the spring bars on the Fastway e2 Weight Distribution System part #FA92-00-1200 with the Replacement Trunnion Spring Bars for Fastway e2 Weight Distribution Systems part #FA92-01-1099. These spring bars would be better…
view full answer...Yes, you can upgrade your Fastway e2 Weight Distribution with 600 lb spring bars to either 800 lb bars or 1,000 lb bars. The right replacement will depend on if you have the Round Bar Fastway e2 #FA94-00-0600 or Trunnion Bar Fastway e2 #FA92-00-0600.…
view full answer...I am not sure what you mean by too much spring action. If you are wanting to downgrade the system by using lower rated spring bars, you would do so because the current bars are NOT providing enough spring. In any event, my Equal-i-zer representative…
view full answer...The trunnion bars on your Reese Weight Distribution System, #RP66022, should not fall out of the head assembly when driving down the road or during normal turns. When backing the trailer or turning very sharply the bar could come loose especially if…
view full answer...