ProPride 3P Weight Distribution Hitch with Sway Control Review PR37QR Video

According to RoadActive Suspension the spring rate for the standard kit #RAS3611-S is 2,400 lbs. For the heavy duty #RAS3611-SHD it is 3,600 lbs. The heavy duty #RAS3611-SLHD is the same but only designed to fit if you have factory top overload…

According to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV instructions you finger tighten the inner jam nuts first and then tighten the outside jams nuts next for the installation. For removal you'll just reverse these steps so…

The ball size of the 7" Monitor for Furrion Vision S Wireless RV Camera System part #FR47FR is about .85". I can't confirm fit of a Ram Mount as we don't carry them but if you can find one with this size ball it will work. The other…

All of the Furrion Vision S setups use the same cameras so you can go with the 7 inch monitor part #FR47FR and it will work great with what you have now.

For V-nose trailers like yours the solution for attaching the side frame brackets to the trailer is to use bolt on brackets since they do not require clearance above the frame. Reese has the kit part #RP58305 which would work great for you. I…

The Reese Chain Hangers part #RP58305 that you referenced are designed to work on trailer frames no wider than 2-1/4 inches and the hangers are 5 inches wide by 3-5/16 inches tall. So if your trailer frame fits those dimensions you should be good.…

You are correct, the Chain Hangers for Reese Weight Distribution Systems, #RP58305, do not work the same way as the lift up brackets. You will need to attach the trailer to the ball mount and then jack up both trailer and truck with the trailer jack.…

We may have something that will allow you to install a weight distribution system on your V-nosed trailer. The bolt-on chain hangers, part #RP58305, provide an attachment point for your weight-distribution spring bars without interfering with…

It is always better to go with a larger system rather than one that is not rated high enough. A system that is rated too low will not be effective because the tongue weight will exceed the ability of the spring bars. On the other side, a system rated…

The shank included with the Blue Ox TrackPro Weight Distribution Hitch #BLU77FR you were looking at has 7 holes of adjustment which translates to 2" of drop and 8" of rise to give you a nice wide range of adjustments to level your trailer…

The Reese Strait-Line Hitch with Shank 1,200 lbs. TW / 12,000 lbs. GTW, item #RP66084, would be a good choice for the tongue weight and gross trailer weight loaded and ready to tow that you have mentioned. Installation instructions and a video…

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…