Customers compare KU93VR to these similar products
Products Featured in this Video
What's up everybody It's AJ with etrailer.com. Today, we're gonna check out this Kuat Receiver Reducer. So, it's gonna be magnetic. And what you're gonna do is take this and put it in our 2-1/2 inch hitch, and just slide in the bottom portion there. It's got a lip up here, to catch it. And make sure you don't slide all the way in.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Roadmaster Quiet hitch would be a great choice. You might actually need two of the Roadmaster Quiet Hitch Anti-Rattle Devices. You'll need part #RM-061-125 for the connection between your adapter and the receiver hitch, and the Quiet Hitch…
view full answer...No, the etrailer Magnetic Hitch Receiver Reducer Sleeve #e28JR will not lower the weight rating of your trailer hitch.
view full answer...The Kuat Magnetic Hitch Receiver Reducer Sleeve part #KU93VR is not designed for towing so I don't recommend using this as such. Instead, I recommend the Curt Hitch Receiver Reducer Sleeve part #C45405 which will allow you to use your 2"…
view full answer...Yes, trailer running lights and parking lights are the same circuit. So on a vehicle when you turn the headlights on there's the position on the selector right before you get to the headlights where all of the exterior lights of the vehicle come…
view full answer...To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…
view full answer...The pintle hook mount that I would recommend for you is the Pintle Hook Mount, 12-1/2 inch Tall, 8K, part #63058. This hook mount has an adjustable rise that will go up to a 12 inches. That would put the height of your pintle hook mount right at 31…
view full answer...I verified with Swagman that the XTC-2 #S64670 will work with a 2-1/2 to 2 inch hitch reducer except for the hitch pin. In order to accommodate the 2-1/2 inch hitch receiver you will need the Locking, Anti-Rattle, Threaded Hitch Pin #S64029 or the…
view full answer...Yes! For a great option to increase the snugness of your bike rack with the hitch reducer, I recommend the Roadmaster Quiet Hitch for 2-1/2" Trailer Hitches #RM-062. This accessory will be able to tighten to provide you with the extra tightness…
view full answer...There are a few things to look at when trying to remove the Thule EasyFold XT Bike Rack for 2 Electric Bikes - 1-1/4" and 2" Hitches - Frame Mount #TH903202. You first want to make sure the locking knob is unlocked; to do this just insert…
view full answer...I called Thule and they have not yet tested the Thule EasyFold XT 2 Electric Bike Platform Rack part #TH903202 on a 2014 Ram 2500 with a 2-1/2" receiver tube opening. Therefore, in order to guarantee you don't have any issues with the…
view full answer...The Thule EasyFold XT Bike Rack #TH903202 will only fit a 1-1/4" or 2" receiver directly. You can use a Brophy Hitch Reducer and Extender #HR26 that will allow for the stinger to fit on your vehicle. The stinger that holds the rack into the…
view full answer...The integrated cable locks that come on the Kuat NV 2.0 Base #BA22B automatically lock when you connect the 2 ends together. When you put the key in and turn it you are actually unlocking it which is why they pop out. If you skip to the 4:15 mark on…
view full answer...