Review of B and W Trailer Hitch Ball - Raw Steel 2-5/16 Inch Hitch Ball - BWHB94004 Video

The Tech at B&W says the hitch ball part #BWHB94004 should tightened to 120 ft lbs with a 2-15/16" wrench.

The wiring color codes and wire gauge recommendations for the Pollak Heavy-Duty, 7-Pole, Round Pin, Trailer Wiring Connector, item #PK11700, are listed below. White - Ground Return - 8 gauge Black - Clearance, Side Marker, Identification - 12 gauge…

The Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers #325-GH-1324 that you referenced doesn't have the same features as weight distribution or sway control so it's hard to compare them. It will cushion the ride quality when you are towing but…

The easiest way to tell the difference between the 2007 Chevy Silverado Classic and New Body Style is the tail gate or the tail lights. The new body style will have a large Chevy bow tie emblem in the center of the tail gate. It will also have red…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

The Curt #C45312 and the B&W #BWBMHD30011 ball mount are wholly manufactured in the USA. Both ball mounts feature a 2 inch drop or a 1 inch rise if inverted. The B&W has a 16K capacity, with the Curt model having a 12K capacity. Both are…

The Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole item #DM13205-95 that you referenced will fit a standard a-frame trailer. This is a bolt on coupler so you won't have to borrow a welder. To install you will want to use 3/8 inch, grade 5…

The Gen-Y Stabilizer Bar Kit for Gen-Y Adjustable Ball Mounts #325-GH-0100 give you a bar length adjustment range of 24- to 33-inches which works for most installations. The bar ends have to be affixed to the vehicle's frame for them to properly…

I have exactly what you need for your 2018 Ram 2500. For this, I recommend the Curt Weight Distribution Shank part #C17132 which has a 2-1/2" shank that offers up to an 9-1/4" drop. According to the measurements you provided, you will need…

Yes, you will be able to replace your stock coupler with the Demco 50-Degree A-Frame Trailer Coupler #DM13205-95 as long as you have a standard a-frame trailer. I attached a picture below of the dimensions below so you can see if it would work for…

The B&W trailer hitch #BWHDRH25182 does not come with the mounting bracket for a 7-Way trailer connector. A couple of cool 7-Way brackets that I like are the Curt Easy Mount #C58000 and the Draw-Tite box, #18159. Either one will work with the…

The Equal-i-zer Weight Distribution System #EQ37100ET that you referenced has a shipping weight of 109 lbs so it is a little hefty like the majority of WD systems out there. If you take away a few pounds for the shipping materials you are left with…