Buyers Products Receiver Tube Adapter Review Video

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer…

Yes, there is a front mounted hitch for your 2022 Ford F-350 dually with a diesel engine. It is the EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH83GR. This hitch is custom fit and bolts to your Ford with included hardware. This front…

For your 2 inch tongue the Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lb #CT-3001-Z is my recommendation. Then I'd use the Fulton Fold-Away Coupler Hinge Kit for 2" x 3"…

As the Buyers Products Plain Receiver Tube 2-1/2" I.D. x 12" Long #337RT255812 is a fabrication part, the tongue weight capacity will depend on the other parts used and what it will be installed on. Due to this, it does not carry a…

It sounds like you have a Class V hitch with a 2-1/2 inch opening on it. 2 inch hitches are more common so if you wanted an adapter to let you use 2 inch accessories the part #C45405 would be what you would need. I attached a couple FAQ articles to…

I have included a picture showing Draw-Tite front mount receiver #65076 installed. It and the Curt hitch install in pretty much the same place.

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

To use the Hollywood Racks RV Rider part #HLY64FR in a 3 inch hitch and allow you to still use the hitch lock you'd need a hitch reducer like the part #337RTA302 which puts the 2 inch hitch out far enough from the 3 inch hitch for the pin and…

The wall thickness of the steel can vary from item to item but generally the wall thickness for hitch extender #HE06 is 3/16 to 1/4 inch. For the majority I have seen, it is 1/4 inch.

The Buyers Products 3" to 2" Receiver Tube Adapter part #337RTA302 is a good option to reduce your 3" receiver tube opening to a 2" receiver tube opening.

The #SHP2040-XL will work with most 3 inch receivers as long as the overall width of the receiver tube measured at the hitch pin hole isn't greater than 3-1/2 inches. If your receiver meets that requirement, the #SHP2040-XL will help prevent your…

For a 3 inch trailer hitch the hitch lock needs to have a 3-1/2 inch usable span like what the part #SHP2040-XL has so for your 3 inch hitch with a 2 inch hitch adapter this would fit and work well.