Review of Draw-Tite Trailer Hitch Ball Mount - Fixed Ball Mount - 2923 Video

The etrailer Hitch item #e98840 weighs 49 lbs. You will want to torque the bolts to 139 lb-ft. The etrailer Hitch item #e98840 is confirmed to fit the 2021 Honda Pilot. I have linked an installation video below to help you get this hitch installed.…

For your 2021 Toyota Highlander the Redarc Tow Pro Elite part #RED69FR and #RED24FR is a great option but since you have a 4-way currently you'd need the #ETBC7 to convert it to a 7-way and wire in the brake controller. And you would want…

The easiest way to tell the difference between the 2007 Chevy Silverado Classic and New Body Style is the tail gate or the tail lights. The new body style will have a large Chevy bow tie emblem in the center of the tail gate. It will also have red…

On your 2019 Honda Pilot, the blue wire and quick connect of harness #118760 should have a mating quick connect in the rear cargo area if you have the backup sensors. It plugs in to the mating vehicle connector, next to the main tow package…

Installing the trailer wiring on your 2019 Honda Pilot is a pretty straightforward process; if you can install the etrailer Trailer Hitch #e99044 on your Pilot I'm very confident you can also install the T-One Vehicle Wiring Harness #118760.…

The European version of the Thule EasyFold XT Bike Rack is designed to mount to a 50mm hitch ball like the Brophy #EH53C-C. I have attached a link that will also take you to our selection of 50mm hitch balls that you can look through.

For a 50 mm hitch ball like you need for your European Thule Easy Fold XT you'd want the Brophy Hitch Ball part #EH53C-C. Then for a ball mount the Draw Tite part #BWBMHD30210 would work great if you had a 2 inch hitch installed like the…

The Curt MV Weight Distribution System part #C17050 offers bolt-on installation therefore you won't have to drill into your trailer frame. The frame hanger brackets which are the only part of the system that installs on the trailer are held…

Curt hitch ball #40038 has a 1 inch diameter shank. For Curt balls with 3/4 or 1 inch diameter shanks you would use wrench #C20001. The nut on that ball should use the 1-1/2 inch end of the wrench. You could also use a large crescent wrench if you…

When the Curt hitch part #C13234 is installed on your 2015 Ford Edge Sport it will have a visible crosstube like in the picture I attached. If you wanted a hitch that doesn't have a visible crosstube you would instead want the part #75234…

Using a lift is certainly the most convenient way to go, but is not absolutely necessary. When I installed the hitch on my van, I did not need to raise the vehicle at all. Having the vehicle on jack stands or ramps would make your installation…

Just to make sure we are accurate on the actual rise you may need, lets cover some basics. With the tow vehicle parked on level ground, measure from the ground to the top of your hitch receiver opening. Then, with the trailer level, measure from…