Parts Needed to Install Redarc Tow Pro Liberty on 2021 Toyota Highlander

Question

Question:

I have a 2021 Toyota Highlander with the towing package. I have a flat 4 connector on the back. I would like to add a 7 pin and trailer brake controller. I am looking at the Redarc control. What wiring do i need to go with it? Do you also have an interior panel plug for my vehicle to mount the control switch? Thx

asked by: Stewart W

0

Expert Reply:

For your 2021 Toyota Highlander the Redarc Tow Pro Elite part # RED69FR and # RED24FR is a great option but since you have a 4-way currently you'd need the # ETBC7 to convert it to a 7-way and wire in the brake controller. And you would want the panel knob insert part # 331-TPSI-002 which is fit for your vehicle to give it more of an OEM look.

expert reply by: Jameson C

0

Answer 1

Glad to hear that you were able to easily install the Curt Trailer Hitch Receiver #13534. I will be happy to help you troubleshoot the Curt T-Connector #56042 for your 2011 Toyota Highlander. Since you do have the factory tow package on your…

view full answer...

Answer 2

We have everything that you need to set up your 2011 Toyota Highlander for towing. First, if you don't already have a trailer hitch, I recommend installing the Draw-Tite Max Frame Class III Trailer Hitch #75726 because it has more than enough…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

To add a brake controller to your 2010 Highlander you will need a 4-way, 7-way upgrade kit, and the brake controller itself. I recommend the following: -T-One Vehicle Wiring Harness #118449 (If you do not have the factory tow package) -Curt…

view full answer...

Answer 9

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 10

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 11

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Parts Needed to Install Redarc Tow Pro Liberty on 2021 Toyota Highlander

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching