Review of Draw-Tite Hitch Adapters - 3 to 2-1/2 Hitch Reducer Sleeve - 58550 Video

As the Buyers Products Plain Receiver Tube 2-1/2" I.D. x 12" Long #337RT255812 is a fabrication part, the tongue weight capacity will depend on the other parts used and what it will be installed on. Due to this, it does not carry a specific…

The outer tube dimensions of the Buyers Products Black Receiver Tube #337RT25818B are 2-1/2" x 2-1/2" square. The length of the tube is 18" long.

The wall thickness of the Buyers Products Plain Receiver Tube #337RT255812 that you referenced is 1/4 inch which means it's outside diameter is 3 inch by 3 inch.

For your 2 inch tongue the Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lb #CT-3001-Z is my recommendation. Then I'd use the Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Trailer Tongue - Bolt…

I may have an option for you, but there is not a 7" extension that fits a 2-1/2" trailer hitch receiver and takes 2-1/2" accessories. The closest option is the Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch -…

While the Draw Tite hitch reducer part #58550 doesn't have a specified weight rating it would easily handle towing a 30 foot trailer without any issues.

We offer weight distribution shanks for 2-inch and 2-1/2-inch hitches, shown on the linked page, but not one for a 3-inch hitch. We can still help you. Adding Curt reducer sleeve #C45408 allows dropping a 3-inch receiver down to either the 2-1/2-inch…

If the trailer hitch has a 3/4" diameter hitch pin hole then that is what you'll need to use when towing with said hitch even when using an adapter such as the Curt Hitch Receiver Reducer Sleeves part #C45408. If you don't have a…

I do have a solution for you, however, there currently is not a 3" shank available for a weight distribution system. You will need to use a reducer sleeve such as Curt Hitch Receiver Reducer Sleeves #C45408, which will reduce a 3" receiver…

Yes, the Curt Hitch Receiver Reducer Sleeves part #C45408 will allow you to use a 2" shank inside a 3" trailer hitch receiver opening. This reducer has a carbide black powder coat finish which will reduce the chance of rust and it has a…

I reached out to Blue Ox directly and was able to confirm that with the Blue Ox SwayPro Weight Distribution system #BXW1000 you will get the best results with the sway control mode turned off on your 2018 Ford F-350. If with the sway control turned…

To flat tow your Ram 2500, you'll need a tow bar, base plates, safety cables, a wiring solution, a supplemental braking system and possibly a high/low adapter. I really like the equipment offered by Roadmaster, the quality and ease of use are…