Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-201-9UC3-EZ Review Video

Hey Wesley, Based on the numbers you provided you'll need the Dexter Trailer Hub and Drum Assembly #8-201-9UC3-EZ you were already looking at would be a correct fit. This comes already pre greased so you won't have to pack the bearings, but I…

The Dexter Trailer Hub and Drum Assembly #K08-201-9B does include the standard and E-Z lube grease caps. What you see in the product images and review video is what you get.

The closest size we have is 2.72 inches and is the part #RG04-120. It's going to be pretty tight but since the caps are tapered as well as most hub bores it would be your best option that will fit based on a previous customer coming back and…

I do have an option for you but there is not really a complete conversion kit for what you are looking for. The best option would be to just replace the axle. In order to do this I would need to know what your hub face and spring center measurements…

Weight ratings are a little weird when it comes to hub/drum assemblies but as long as the bearings and the inner diameter of the seal (2.250") that comes with the Dexter Trailer Hub and Drum Assembly - 6,000 lb E-Z Lube Axles #K08-201-9B matches…

From our experience the military trailer you have uses a standard lunette ring so a pintle hook like the Curt #C48005 would work fine.

I reached out to my contact at Dexter and based on the part number you provided you have an older mobile home axle that has an 86-1/2" hub face to hub face measurement, and 75-1/2" spring center to spring center measurement. They were…

Typically mobile home axles don't have spindles that standard trailer hubs can fit but in your situation you could use the part #008-213-9B which matches the dimensions you listed. This comes with bearings and seals as well.

Since your spindle uses inner bearing #25580 and outer bearing #LM67048 the Dexter Trailer Idler Hub for 5,200-lb Axles - 6 on 5-1/2" #008-213-9B is going to be the correct replacement and includes new bearings, races, grease seal, and lug nuts.…

On Dexter Trailer Hub and Drum Assembly #8-201-5UC3 the outer diameter of the hub center is 3-3/16-inches at the top/outer surface, tapering to 3-5/16-inches at the base near the hub face. These dimensions, which I took myself in our warehouse, are…

Dexter makes 5,200 lb trailer brake assemblies that are self adjusting like part #23-458-459 as well as ones that are manual adjust like part #23-105-106 so it could go either way. I attached a picture that points out what to look for on your…

To re-wire your 18 foot car hauler with electric brakes on one axle, I recommend using a wiring junction box like #38656 in order to make the connections from the lights and brakes. Then for a 7-way trailer plug, you can use the Hopkins #H20046. This…