Dexter Left and Right Electric Trailer Brake Kit Installation Video

Yes, the etrailer coupler part #CT-5003-Z is an exact replacement for the Ram coupler you have now. The mounting holes are the exact same dimensions.

Attached is a photo showing the dimensions of the bolt holes for the Dexter Electric Trailer Brake Kit #23-105-106. The bottom holes are separated by 3" on center while the other bolt holes are separated by 2-1/8" on center. I have also…

We actually have an FAQ article that explains exactly what you need to do to add a 7-Way to a 2008 Ford E-series van with a factory 4-Way wiring harness. I have linked it for you. There is no simple plug-in harness that will work but installation of…

Trailer hub and drum assembly #8-201-5 does match your bearings. I am fairly certain you have 5,200 pound axles and not 3500 pound axles since all of the parts you need are for higher rated axles than 3500 pounds. The races come already pressed into…

The difference really comes down to brand recognition, price, and warranty, but apart from that they are very similar. Dexter is a leading brand and people know they are getting quality, hence the higher price. They Dexter also do have a 5-year…

Thanks for all of the info on the axle you have on your trailer. Since you have a Dexter 5,200 lb axle with a 6 lug bolt pattern the correct hub/drum you need is the Dexter #K08-201-98.

It sounds like the 6K might be referring to 6,000 pounds although I cannot be 100 percent sure on that. I could tell you for sure if you could tell me the inner and outer bearing numbers stamped in to the bearings. A 7K axle will use inner bearing…

It sounds like you're looking for replacement brakes for your 12,000 lb Moritz dump trailer. From what I have found, this trailer uses tandem 6,000 lb axles. Based on that information, I recommend the Dexter Nev-R-Adjust Electric Trailer Brake…

Yes, I do have the exact dimensions you need of the Demco Channel Tongue Trailer Coupler part #DM15945. I have attached these for you below.

Yes, the mounting holes for the Channel Tongue Trailer Coupler #CT-5003-Z measure 1" from the center down to the bottom of the channel.

To determine if there are compatible hubs and associated bearings to replace your current hubs to a more standard size you will have to take several precise measurements on the spindle of your axle. It is recommended to use a set of dial calipers to…

The attachment bolts for a 5-bolt brake assembly like the part #AKEBRK-6R should be torqued to 30-50 foot/lbs. If you don't have a torque wrench handy, if you tighten the bolts until the lock washers flatten out, you'll be pretty darn close…