Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-6-EZ-K Video

You shouldn't really have any play with the Easy Grease Trailer Hub and Drum Assembly #AKHD-655-6-EZ-K. If you are getting play in it then the bearings most likely are either not set correctly or were the incorrect choice for your axle's…

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

The 008-201-09 number you provided comes back on a Dexter Axle hub that we offer as part #8-201-9UC3-EZ, a 12 x 2 inch brake drum. This hub uses a 25580 inner and 15123 outer bearing, so please check the reference numbers on your existing bearings to…

Mobile home axles, hubs, and parts are designed for more of a one time use. Most of the time, replacement parts and options are not available. However, since you found the bearing numbers (Inner Bearing Item #25580 and Outer Bearing Item #15245) then…

Because the 8-14.5 tire that you've got sits on a 14.5" wheel, so you wouldn't be able to switch tire sizes with anything that we have available without also switching to a new wheel as well. If you've got a 6 on 5-1/2" bolt…

You will not want to use agricultural hubs if you intend to pull the trailer on the highway. Agro hubs are usually speed-limited to 20-mph. Similar speed limitation generally applies to tires intended for use on farm equipment. The keys for selecting…

The only difference between the #AKHD-655-6-K and the #AKHD-655-6-EZ-K is the cap that the hub uses. One is a solid cap and the other has a rubber plug that can come off for access to EZ lube fittings. Since you have caps already you could use either…

The head of the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550035 that you referenced is rated to be able to handle up to 5,250 lbs of vertical weight. If you wanted to wrap a rope around the head to lift the weight of the hitch…

The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…

As long as your existing hub drums are in good condition (no grooves worn in the armature surface that the brake magnet rides on or the surface that the pads grab), and the 10x2-1/4 inch brake assemblies you referenced are compatible with the inside…

The biggest difference between the 6,000 lbs Dexter Trailer Brake Assembly part #23-106 for right hand and part #23-105 for left hand and the 7,000 lbs Dexter Trailer Brake Assembly part #23-181 for right hand and part #23-180 for left hand is the…

An EZ lube spindle will be better because it allows you to insert grease from inside the spindle where the bearings are and push out the old grease whereas with a Bearing Buddy you basically just get to push grease through the front of the hub. I…