Customers compare 8-201-9UC3-EZ to these similar products
Products Featured in this Video
Today we're going to take a look at and show you how to install the Dexter Axle EZ Lube Trailer Hub Assembly. This has the 6 on 5 1/2 inch bolt pattern and it works great for 5,200 pound and 6,000 pound axles. Part number is 8-201-9CU3-EZ. Now, on the rear axle we've left everything just as the trailer rolled in, so now we'll go ahead and show you how to install it. First things first, we're going… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hey Wesley, Based on the numbers you provided you'll need the Dexter Trailer Hub and Drum Assembly #8-201-9UC3-EZ you were already looking at would be a correct fit. This comes already pre greased so you won't have to pack the…
view full answer...The closest size we have is 2.72 inches and is the part #RG04-120. It's going to be pretty tight but since the caps are tapered as well as most hub bores it would be your best option that will fit based on a previous customer coming back…
view full answer...Since wheels will be able to withstand the psi rating of any of the tires that are meant to fit it you will need to look at the valve stem as that is the deciding factor. If your valve stem has the rubber all the way up to the threads, like part…
view full answer...Congrats on the new camper! For an extra Dexter 8-201 hub you will want the Dexter Trailer Hub and Drum Assembly item #8-201-9UC3-EZ. These are sold individually but can be used on either side. For a spare set of Nev-r-adjust brake assemblies…
view full answer...The part you were looking at, Redline part #RG04-010 is designed to replace the caps on Dexter EZ Lube axles. If your trailer has Dexter EZ Lube axles this part will fit.
view full answer...The Grease Cap Plug for the E-Z Lube Grease Caps, #RG04-010, has a measurement of 1.18 inches. I checked a few other references and could not find any measurement other than the 1.18 inches for the size of the rubber plugs.
view full answer...Since time is a factor and we do not have the complete axle brake and hub set up, Item #8327816-EB, in stock (August 2021). I recommend the Dexter Trailer Axle with E-Z Lube Spindles item #8327816. This axle is 86-1/2" Long with a 5,200 lbs…
view full answer...My contact at Dexter Axle tells me that when installing a brake assembly to the backing plate of a 3500 lb axle, the bolts should be tightened in a criss-cross pattern to between 45-70 foot lbs.
view full answer...We offer a range of grease seals in various sizes. These can be seen on the link provided. You can select parts based on the seal inner and outer diameters or you can use the bearing number from your trailer to search for a grease seal. I have…
view full answer...Based on the dimensions you listed we have the part #010-180-00 which would fit and work well. This has an outer diameter of 2.33 inch and an inner diameter of 1.68 inch like you need so it would work well.
view full answer...The biggest difference between the hubs part #8-201-5UC3 and #8-201-9UC3-EZ is the grease cap style and the weight capacity. The #8-201-5UC3 is for non EZ lube spindles basically which means it has a solid grease cap and has a 2,600 lb capacity, and…
view full answer...The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…
view full answer...