Review of Optronics Trailer Wiring - 7 Way Round RV Style Trailer Connector To Blade - A7WCB Video

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

The Optronics 7-Way Connector - Trailer End #A7WCB will handle 8-gauge wires on the positive and negative connectors. If you want the same gauge wire on the vehicle side, I recommend the Hopkins Endurance 7-Way Trailer Connector Socket - Vehicle End…

The SumoSprings kit #TSS-106-40 does for sure fit your application based on the dimension you just mentioned of 7-3/4 inches from the spring plate to the bottom of the trailer frame. This kit works with dimensions here that range from 6 to 8-5/8…

The Timbren kit part #TTRA1702 is 2-3/4 inches tall and would work great for you to give you additional support. This will provide up to 1,000 lb of additional support.

For your Lance 855s Camper with standard tracks I recommend the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 #RRRLT600 and then crossbars like the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black -…

The main difference between the Curt 5th Wheel/Gooseneck Custom Wiring Harness part #C56070 and the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness part #41157 is that the Curt harness is 7' long and comes with a one year warranty…

After watching that portion of the video for installing the Roadmaster Direct-Connect Base Plate Kit - Removable Arms Item #RM-523193-5 I believe he meant to say 7mm and instead said 10mm and in editing they forgot to remove that part. If you look at…

If you are referring to the battery temp monitor on the Go Power Industrial Pure Sine Wave Inverter Charger, #34275013, then yes you should. The temperature sensor installs to the negative battery terminal then connects to the battery temperature…

The Tow Ready Vehicle To Vehicle Taillight Converter, #118158, you have referenced will not be needed since you will be staying with a 3-wire system (separate stop and tail lights)on both of your vehicles. The converter is only needed if you had a…

Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.

Is there a solenoid screwed in to the back of the master cylinder on the trailer? Or is there a lever on the actuator that you move whenever you need to be able to back the trailer up? If so, then you have a reverse lock out. I attached a link to a…

Porpoising (bouncing like you described) and sway are both commonly caused by the same thing when towing and that is not enough tongue weight for the trailer relative to the total amount of weight the trailer weighs. You need the tongue weight to be…