Dexter Nev-R-Adjust Electric Trailer Brake Kit Installation - 5th Wheel Video

For your 1st question, yes the Dexter Nev-R-Adjust Electric Trailer Brakes #23-464-465 are going to fit the 5 bolt mounting flange on your 7,000lb axle for your 2020 Grand Design Solitude 380FL. For your 2nd question, yes the Trailer Hub and Drum…

The torque setting for the Kodiak Trailer Wheel Lug Nut, Item #KALN1375S, ranges from 90- to 100-ft-lbs. You will want to avoid using an impact wrench or similar tool because you can not measure the force being applied. For best results, use a torque…

A bearing, no matter where it is made, has to meet certain standards for use in the United States. With that said there are some cases where despite having to meet these standards, the US made product is better. When it comes to bearings though I…

The brake assemblies you have are Dexter 12 inch assemblies with a 7k capacity. That means the current part numbers you would want are #23-464 for the left hand side and part #23-465 for the right hand side. The part #23-464-465 that you referenced…

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

The two hubs are very similar but the big difference is the size of the seal that comes with the hubs. The #8-219-9UC3-A comes with a seal that has an inner diameter of 2.25 inches and the #8-219-9UC3 comes with a seal that has an inner diameter of…

Normally you would go by the bearing numbers stamped into the sides of the bearing. If you do not have those bearings though then the spindle will have to be measured. Since you have Nev-R-Lube axles though there are not that many options. If the…

The correct braking assemblies that match up with the Trailer Hub & Drum Assembly part #8-385-81SP are the Dexter Nev-R-Adjust Electric Trailer Brakes part #23-464-465.

The Dexter Spindle Nut #6-183 used with your 50mm Nev-R-Lube bearing #31-71-3, requires 145 to 155 ft/lbs of torque, according to the manufacturer's specifications. See attached diagrams for step by step instructions.

The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…

It appears that the HydraStar Disc Brake Kit #HSE7K-T1 is the correct kit for your 2021 Vanleigh Vilano 320GK. To verify this you can find the axle serial numbers and send that information to me so I can verify all the components are correct.…

The #LC696740 Lippert Road Armor is for 3500-8000 lb axles, and is meant to replace existing equalizers that are 6 inches wide and 3-1/2 inches tall. If your axle capacity and leaf spring equalizers match that, the #LC696740 Road Armor kit will work…