Curt Hitch Locks - Standard Pin Lock - C23517 Review Video

There are not exact torque specs for the other bolts in the Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting, part #C18085. I took a look at the installation instructions and like you, I only saw a torque…

Both rise and drop are measured from the top of the drawbar's shank to the top of the hitch ball platform. The length of the drawbar is measured from the center of the hitch pin hole to the center of the hitch ball hole. I've added a…

The only trailer component that determines the speed rating of the trailer is the tires. All you have to do is simply replace your current tires with one that is rated for highway use, like the Kenda Loadstar #AM3S120 that you referenced, and you…

Using any hitch adapters in the trailer hitch on your Grand Caravan will reduce the trailer hitch capacity by 50 percent. From my research I found that you may have a Class ll or Class lll trailer hitch and it could have a 2 inch or 1-1/4 inch…

The etrailer Hitch Mounted Spare Tire Carrier part #e98ZR works with any spare wheel/tire with bolt pattern up to 6 on 5-1/2", so 5 on 4-1/2" and 4 on 4" are all good as well. The tire size doesn't really matter, it's about the…

The ST225/75R15 radial tire on the Westlake Tire w 15 Inch Liger Aluminum Wheel #LH36FR that you referenced weighs 30 pounds by itself. The 15-inch Liger Aluminum Wheel that it is mounted to has a weight of just about 15 pounds. This is a really nice…

Thank you for providing a photo of your Malibu and power chair carrier. Use of ANY type of trailer hitch adapter/extender, such as the Brophy #HT5R that you referenced, will have an undesirable side-effect: it will reduce your hitch's tongue…

The anti-rattle adapter I recommend is the No-Rattle Trailer Hitch Wedge, part #MPG908. This will work for 1-1/4 inch and 2 inch receivers and is designed to insert into the small gap that may exist on your receiver. You then tighten it up after it…

The Kuat Transfer part #KU74FR that you referenced will fit both a 1-1/4 inch and 2 inch hitch equally well. The metal sleeve adapter that allows it to fit the 2 inch hitch size provides just as solid of a connection as the 1-1/4 inch hitches.

In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I attached…

Yes, most bike rack manufacturers will use an exclusive size and thread on the hitch lock for their own brand of bike racks. So, the Kuat bike racks will only be able to use the #HL1 for a hitch pin lock. We have not run into any problems with the…

I believe you are looking for the Camco Propane Adapter #CAM59213 which is a Female P.O.L./Male ACME x 1"-20 Male Throwaway Cylinder designed for connecting a small appliance that runs off a small tank to an RV propane source.