Kuat Beta Folding 2 Bike Rack Review Video

Your concerns are definitely valid because the Access Ramp #ANVBRB was designed specifically for the NV 2.0 and it won't fit the Kuat Sherpa 2.0. If you really like your Sherpa 2.0 then your best option is to upgrade to the NV 2.0 so that you…

I have a great bike rack for you but the Kuat NV 2.0 item #NV22B does not work for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the added bumps and torque from your vehicle when…

The Kuat Beta #B202-2 is rated for 40 pounds per bike. Provided that both bikes are at or below 40 pounds you could use this bike rack. If your electric bike weighs over 40 pounds then there are other options that will work. The Saris Freedom…

You have a Class I trailer hitch and what you are describing is a stop that was intentionally punched in the receiver of the hitch. It is there to prevent the use of Class II accessories that could lead to the hitch being overloaded. Your bike rack…

There are not exact torque specs for the other bolts in the Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting, part #C18085. I took a look at the installation instructions and like you, I only saw a torque…

If you have a hitch-mounted bike rack like the Curt 2 Bike Rack for 1-1/4" and 2" Hitches #C18085 with a 2-inch sleeve, it will not make any noticeable difference as far as wobble if you get a hitch specially designed to only fit your 1-1/4…

The correct hitch lock for the Kuat Beta item #B202-2 is the Hitch Lock for Kuat Bike Racks - 2" Hitches item #HL2. I have linked a review video.

Trailer hitch wear and tear is a normal thing and comes from salt that is used on the road or from different objects flying up under your car and hitting the trailer hitch. Although keeping a used trailer hitch in mint condition is impossible, there…

You can take a quick measurement to make sure you have the clearance at the rear of your Outback. You will need a tape measure and a straight edge like a yardstick or a dowel. Place the straight edge vertically against the back of the bumper or spare…

When we installed the Curt hitch #C13206 on a 2017 Subaru Outback Wagon we found that from the center of our hitch pin hole to the outer most edge of our bumper was right at 2-1/4 inch.

The etrailer hitch part #e98847 that you referenced is a confirmed fit for your 2016 Subaru Outback Wagon and would work well if the Kuat Transfer bike rack you have now. The other option you might consider is the Draw Tite #76227 which has a…

For a trailer hitch to fit your 2018 Subaru Outback Wagon which will allow you to also use your Kuat Transfer TS02G the Curt Hitch #C13206 would be your best option as it allows the rack to fold up unlike the Draw Tite. This is a 2 inch trailer hitch…