Curt Hitch Bike Racks Review - 2012 Volkswagen CC Video

Yes, it will. The Kuat Transfer V2 Bike Rack item #KU64FR is confirmed to fit both class I and II 1-1/4" hitch receivers. It only weighs 26 lbs and has a 60 lbs capacity.

If you have a hitch-mounted bike rack like the Curt 2 Bike Rack for 1-1/4" and 2" Hitches #C18085 with a 2-inch sleeve, it will not make any noticeable difference as far as wobble if you get a hitch specially designed to only fit your 1-1/4…

There are not exact torque specs for the other bolts in the Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting, part #C18085. I took a look at the installation instructions and like you, I only saw a torque…

You have a Class I trailer hitch and what you are describing is a stop that was intentionally punched in the receiver of the hitch. It is there to prevent the use of Class II accessories that could lead to the hitch being overloaded. Your bike rack…

It sounds like you have the Kuat Transfer V1. If that is the case, the weight capacity is actually 40lbs. instead of 45lbs. This would not be adequate for using your 50lb. e-bike. You would need to upgrade to the Kuat Transfer V2 Bike Rack #KU64FR,…

Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks - 1-1/4" and 2" Hitches #HLT has a diameter of 1/2". These locks are threaded specifically to fit Kuat Transfer and NV Core bike racks that fit in 1-1/4" and 2" hitches I…

Your best option for avoiding ground contact with a hitch mounted rack will be a platform style rack with a large or offset rise. This means the distance from the shank where the rack connects to the hitch and where the bikes actually sit is much…

To pair with the Swagman Current #S64678 I recommend using the SportRack Bike Frame Adapter Bar for Women's and Alternative Frame Bikes #SR0500, which will fit well on your Trek Verve 2 Lowstep. These are meant to work as universal parts though,…

For your 2016 Toyota Corolla I recommend Draw-Tite trailer hitch #24913. It does not require a strap to use a bike rack. Once installed the hitch will be approximately 9-1/2 inches up from the ground. But, since the hitch is positioned at the end of…

The answer to your question will depend on your bumper. More than likely the #MO22FR will be the correct part for your Grand Design Transcend Xplor 321BH. If you have a tube frame with a bumper that is 4" - 4-1/2" wide then this will work…

One of the great things about the Curt platform bike rack part #C18085 is that it can easily attach to women's bikes like yours and not need an adapter bar. I attached a picture that shows this rack holding a cruiser style bike with a very low…

The Thule square crossbars and the Malone crossbars are the same width and height at 1-1/4 inches wide by 7/8 inches tall. There's no reason the Malone bar wouldn't fit into the older Thule square Podium feet but you should note that it's…