Kuat Beta Hitch Bike Rack Review - 2012 Honda CR-V Video

I have attached a few photos for you with all the dimensions we have for the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR. That said, Ark is an Australian company so the measurements are in metric, millimeter to be specific so you may need…

There are not exact torque specs for the other bolts in the Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting, part #C18085. I took a look at the installation instructions and like you, I only saw a torque…

If you have a hitch-mounted bike rack like the Curt 2 Bike Rack for 1-1/4" and 2" Hitches #C18085 with a 2-inch sleeve, it will not make any noticeable difference as far as wobble if you get a hitch specially designed to only fit your 1-1/4…

You have a Class I trailer hitch and what you are describing is a stop that was intentionally punched in the receiver of the hitch. It is there to prevent the use of Class II accessories that could lead to the hitch being overloaded. Your bike rack…

Sounds like you have a 2-1/2 inch hitch on your 2016 Ford F-350 and need a longer hitch pin lock to fit it. The part #e98881 would be exactly what you would need since this lock is designed to fit 2-1/2 inch hitches.

A great style of bike rack for front hitches is the platform style. This will increase visibility when driving. A great bike rack for this is the Thule T2 Classic 2 Bike Platform Rack #TH9045, its is a great fit with your trailer hitch #65003. Most…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

The most accurate way to spec out a weight distribution system is to positively determine the tongue weight of the RV when it's fully loaded up as you'd typically have it when towing. To that figure, you'd add the weight of anything…

If you are tightening down the anti-rattle bolt on the Hollywood Racks Trail Rider 2 #HR200Z that you mention, then the only time you should really see any play is when making evasive maneuvers or hitting bumps like in the test course video. After…

The Hollywood Racks Trail Rider part #HR200Z does have a 45 lb per bike capacity as we have confirmed this with Hollywood Racks. I attached a review video for this bike for you to check out as well.

The upright mast of the Hollywood Racks part #HR200Z folds to the side like what you see in the picture I attached. I also attached a review video for this rack for you to check out as well.

I checked with Ark and they informed me that their Drop Down Corner Stabilizer set part #AR34FR will work great on your 2015 Passport Grand Touring Ultra Lite but these jacks do not have a weight capacity. This is what they sent me: "The #AR34FR…