Curt Hitch Adapters - Hitch Expander - C45785 Review Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

On your 2003 Volvo V70 there should be 3 factory weldnuts on each side of the frame to which the Curt Trailer Hitch #C12318 you referenced gets bolted. With that being said the factory tow bracket on the passenger side, which needs to be removed…

The Wiring Harness, #C59496, is the correct wiring harness for your 2006 Volvo XC70 wagon. This harness was designed not to interfere with any bulb warnings or sensors on your vehicle. This harness uses power from the vehicle battery to power the…

Yes, you can use adapter #hes0 for towing a trailer. It does not sound like your trailer will be all that heavy but keep in mind that the use of an extender will reduce the tongue weight capacity of the trailer hitch by 50 percent. The adapter itself…

I spoke with my contact at Rola and he stated that the Railed Cargo Carrier, #59507, has a solid shank. You can still use an anti-rattle device with a solid shank accessory. I recommend the No-Rattle Trailer Hitch Wedge, #MPG908. I have included a…

To add a 100 lb tank to your two 30 lb tanks, I recommend the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports #103615. This will allow you to connect the red fitting to one of your tanks and the…

Since the Curt Carrier part C18152 that you referenced doesn't fold, I would recommend the etrailer brand folding carrier #e98874. This is also a 24 x 60 inch cargo carrier with a 500 lb capacity that folds and should work well for you for both…

The adapter you need to install on the 100 lb tank is the part #204128-MBS. This will thread onto the tank and give you the correct fitting for your ACME type 1 pigtail to connect to.

I have a couple options that you can consider for your Champion Dual Fuel Generator. First is the simplest as everything can be easily attached to your current hose and regulator. The MB Sturgis Sturgi-Stay T-Fitting w Hose #103615 will add a tee…

I have a solution for you, but the distance from the hitch pin hole of the Curt adapter part #C45785 to the back of the hitch opening is 2.55 inches so it would not be deep enough for your bike rack. Instead we have the Brophy hitch adapter part…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

The etrailer Hitch Mounted Spare Tire Carrier part #e98ZR works with any spare wheel/tire with bolt pattern up to 6 on 5-1/2", so 5 on 4-1/2" and 4 on 4" are all good as well. The tire size doesn't really matter, it's about the…