Does the Rola Railed Cargo Carrier, # 59507 Have a Solid Shank and What Anti-Rattle Device Will Fit

Question

Question:

is this 1.25 shank hollow? is it compatible with your anti rattle kit?

asked by: d h

0

Expert Reply:

I spoke with my contact at Rola and he stated that the Railed Cargo Carrier, # 59507, has a solid shank. You can still use an anti-rattle device with a solid shank accessory. I recommend the No-Rattle Trailer Hitch Wedge, # MPG908. I have included a video review of this anti-rattle device below.

expert reply by: Michael H

0

Answer 1

To add a 100 lb tank to your two 30 lb tanks, I recommend the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports #103615. This will allow you to connect the red fitting to one of your tanks and the…

view full answer...

Answer 2

I have a couple options that you can consider for your Champion Dual Fuel Generator. First is the simplest as everything can be easily attached to your current hose and regulator. The MB Sturgis Sturgi-Stay T-Fitting w Hose #103615 will add a tee…

view full answer...

Answer 3

Since the Curt Carrier part C18152 that you referenced doesn't fold, I would recommend the etrailer brand folding carrier #e98874. This is also a 24 x 60 inch cargo carrier with a 500 lb capacity that folds and should work well for you for both…

view full answer...

Answer 4

The adapter you need to install on the 100 lb tank is the part #204128-MBS. This will thread onto the tank and give you the correct fitting for your ACME type 1 pigtail to connect to.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Does the Rola Railed Cargo Carrier, # 59507 Have a Solid Shank and What Anti-Rattle Device Will Fit

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching