Curt Ball Mounts - Adjustable Ball Mount - D900 Review Video

I can tell you how far the Curt #C15400 extends out from the frame and you can use that to determine the measurement to the end of the service body. We don't have information on the RKI S6080 or a way to determine that distance otherwise. The…

The mounting flanges of the Curt hitch part #C15800 are 11.6 inches in length. This is a fit for your 2022 Chevy Silverado 2500 cab and chassis model.

The Curt Trailer Hitch Receiver part #C15400 and the Curt Trailer Hitch Receiver part #C15800 are the exact same trailer hitch save for one has a 2" receiver tube opening and the other a 2-1/2" receiver tube opening. The dimensional drawing…

I produced a short video and added dimensions to a photo for you so that you could measure and be sure the CURT Multi-Ball Adjustable Ball Mount, #D900, would work on your 2005 Jeep Liberty with rear mounted spare tire. The most critical measurements…

The issue with hitch extenders is that they end up cutting the capacity of the hitch they are installed in by 50 percent due to the extra length and movement in the hitch. So with that in mind there isn't a hitch extender we can offer that will…

Since hitch extenders like the 11" Roadmaster #RM-071 you show in your pictures reduces the weight rating of the hitch by 50% we typically recommend avoiding them as a solution. For your application we have ball mounts with extended shanks that…

The Buyers Products Replacement Tri-Balls #3373020620 for Adjustable Tri-Ball Hitch #3371802225 is 1" from the hitch pin center hole to the end of the hitch tube(see image). This is the same measurement for all the mounting holes as they are in…

I'll start off by saying that in almost all cases, using a hitch extender will reduce your tongue weight by 50%, so your 350-lbs TW/3500-lbs towing capacity hitch is likely limited to 175-lbs TW and 1750-lbs towing. However, the Buyers Products…

The Buyers Products Adjustable Tri-Ball Hitch part #3371802225 and the Curt Multi-Ball Adjustable Ball Mount part #D900 are both very similar. The main difference as you mentioned is that the Buyers Products Ball Mount has a longer shank which then…

The distance between the bolt holes for the Replacement 2" Receiver for Curt Multi-Ball Adjustable Ball Mount #C45802 is 2-5/8" on center. Since that same measurement for the MaxxTow Adjustable-Height Ball Mount MT70067 is 1-1/2" on…

We do have something that will work for your application! It looks like you have the Curt Adjustable Weight Distribution Shank #C17100 so to use a ball mount you'll need the Replacement 2" Receiver #C45802 and I recommend using the matching…

I do have an option for you but the Replacement 2" Receiver part #C45802 does not accept a standard ball mount. It only works with the Replacement Tri-Ball part #C45800 which when combined with the Replacement Shank part #C45059 would give you…