Buyers Products Adjustable Tri-Ball Mount for 2" Hitches - 6" Drop/Rise - Solid Shank
(81 reviews)
Price: $154.95
In Stock
Buyers Products Adjustable Tri-Ball Mount for 2" Hitches - 6" Drop/Rise - Solid Shank
Item # 3371802225
Retail:$187.37
Our Price: $154.95
You Save: $32.42
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (81)
- Q & A (0)
- Photos
Buyers Products Trailer Hitch Ball Mount - 3371802225
- Fits 2 Inch Hitch
- Adjustable Ball Mount
- Drop - 6 Inch
- Rise - 6 Inch
- 1-7/8 Inch Ball
- 2 Inch Ball
- 2-5/16 Inch Ball
- Three Balls
- 10000 lbs GTW
- Class IV
- Buyers Products
- Steel Shank - Gloss Black
- Steel Ball
Tow nearly any trailer with one supremely adjustable ball mount. Chrome-plated balls and black powder coated shank resist rust. Tow up to 6,000 lbs with the 1-7/8" ball; 7,500 lbs with the 2" ball; or 10,000 lbs with the 2-5/16" ball.
Features:
- Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle
- Shank slides into hitch receiver
- Ball provides connection point for trailer coupler
- Adjustable height lets you tow trailers of different heights with the same vehicle
- Slide ball mount up or down along shank and secure in place with included pins and clips
- 3 Different-size hitch balls let you tow trailers with different coupler sizes
- To switch ball, simply remove, rotate and reinsert drawbar
- Chrome-plated balls are permanently attached
- Solid shank is extra strong and durable
- Black powder coat finish is corrosion resistant
- Durable steel construction
- Hitch pin and clip included (hitch lock sold separately)
Specs:
- Application: 2" x 2" trailer hitch receivers
- 1-7/8" Ball
- Gross towing weight: 6,000 lbs
- Tongue weight: 600 lbs
- 2" Ball
- Gross towing weight: 7,500 lbs
- Tongue weight: 750 lbs
- 2-5/16" Ball
- Gross towing weight: 10,000 lbs
- Tongue weight: 1,000 lbs
- Maximum drop: 6"
- Maximum rise: 6"
- Length (from center of hitch pin hole to center of hitch balls: 16"
1802225 Buyers Products Adjustable Tri-Ball Hitch Solid Shank With Chrome Balls
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- etrailer mistake
Customer Reviews
Buyers Products Adjustable Tri-Ball Mount for 2" Hitches - 6" Drop/Rise - Solid Shank - 3371802225
Average Customer Rating: 4.7 out of 5 stars (81 Customer Reviews)
Tow nearly any trailer with one supremely adjustable ball mount. Chrome-plated balls and black powder coated shank resist rust. Tow up to 6,000 lbs with the 1-7/8" ball; 7,500 lbs with the 2" ball; or 10,000 lbs with the 2-5/16" ball.by: Satisfied customer01/03/2024
Nice piece - installation simple
by: Cal09/27/2019
All around great hitch, sturdy and slick looking! Makes hauling a lot smoother and more balanced. Instead of having to carry around 3 different hitches, this makes everything much easier.
by: Elsa02/06/2024
It'd Heavy Duty. It'll probably last longer than my truck.
by: Rocky01/04/2022
The hitch looks first rate and plenty suitable for use on my F350 Super Duty. The price was very fair not to mention free shipping. I look forward to future transactions with etrailer. Thank you.
by: David 06/21/2023
Excellent product and service. I would buy from you again or recommend to others
by: Mike08/31/2020
I am totally unsatisfied with this product. It has way too much play in it. It sticks SO far back off the truck that i had to add about 10” of chain to all of my trailers to even be able to secure them to the hitch!!! Worst investment i ever made on a hitch. Will replace it as soon as i can come up with enough money to do so!!
by: Steve 09/17/2019
Very well built! Heavy and solid. I like the adjust-ability and ease of use. The only hitch I'll need for all my trailers. No matter what size ball or how high or low the tongue is. This will stay with my pickup at all times. The only downside would be that the hitch is longer than necessary. I'm going to drill another hole in the 2 inch shaft to shorten it up a bit so my safety chains reach.
by: Jason C07/17/2023
Best service with quick delivery. Always arrives before due.
by: Big Eeb05/29/2019
I found the product was exactly as described. The only reason for not giving it 5 stars was: I feel the bar that slides into the hitch could have had more holes for the customer to adjust how far it sticks out away from the truck. Other than that, performs as it should. Some customers complain about it rattling excessively I did not find it to be any noisier than the expensive one I had before.
by: Kelly 04/18/2020
Exactly what I needed without breaking the bank. Fast shipment and quality product
by: Craig09/29/2019
Too heavy & bulky for my 2017 GMC Sierra 1500. Exchanging for B&W flush mount 3 ball hitch.
by: Dan 09/16/2019
Very happy with this purchase. Nice, heavy duty hitch that is made well. Would recommend to anyone. Solid shank is nice, adjustment of different ride heights is super easy.
by: Mark05/09/2019
The hitchs that I order full filled my exspseption , thy were delivered in a timely maner much earlier than I had expected I am very satisfied with the product and the professionalism that wrecived from etrailer and the cost was was half of what I Could have bought the same product locally . Thank you etrailer
by: Jon 04/07/2020
Will use with my F 150. Perfect solution for needing to pick up any rental equipment and also hook up to my fellow contractors trailers. Heavy, sturdy, easily adjusted.
by: William11/26/2018
Shockingly surprised. Very well built, exactly what the Dr ordered. (Caution) unit is solid and a little on the heavy side for my wife to maneuver around. Fantastic item.
by: Ryan 08/25/2022
Best hitch
by: Dennnis09/26/2019
This is a very heavy duty well built hitch. Quality at its finest. Finally one hitch for all my needs.
by: Matt 10/20/2019
Ordered on Tuesday received Friday morning (free shipping) product is easy to assemble and is spectacular quality. Will be buying from e trailer in the future. Great customer service as well
by: Erik 12/14/2022
Received super quick! Thank you.
by: Gary 06/05/2021
Easy straightforward use.Sturdy strong and heavy would buy it again. Should last for a long time.
by: Michael 01/18/2022
Love it! So versatile. And so easy to adjust and use. Great product. Thank you.
by: William07/04/2019
the hitch assembled very easy. Fits my pickup great.
nice quality. I would recomend this product.
by: Connie 12/02/2019
My husband has this hitch & has had it for several years. He loves it. Our grandson wanted one just like walk grandpa has, so this is his Christmas present. Excellent product.
25
81
Show More Reviews
See what our Experts say about this Buyers Products Trailer Hitch Ball Mount
- Comparing the Curt Tri-Ball Mount D900 and Buyers Products Tri-Ball Mount 3371802225 The Buyers Products Adjustable Tri-Ball Hitch part # 3371802225 and the Curt Multi-Ball Adjustable Ball Mount part # D900 are both very similar. The main difference as you mentioned is that the Buyers Products Ball Mount has a longer shank which then allows for more rise/drop adjustments. The more rise/drop adjustments you have, the greater number of trailers you can tow level. In regards to the manufacturer, both Curt and Buyers Products are reputable brands so I would not let this alone...
view full answer... - Complete Towing Package for 2020 Ram ProMaster 3500 Hitch, Wiring and Brake ControllerThe Curt Trailer Hitch Receiver Class III - 2" # C13207 is the one I recommend for your 2020 Ram ProMaster 3500 (excluding EXT models). It doesn't require any drilling so installing it is super simple. It's rated to tow up to 6,000 lbs and 600 lbs tongue weight. For a wiring kit that comes with everything you'll need to install a fully functional 7-way connector, the Tekonsha # 22112 is the way to go. You'll simply use the t-connectors to plug into the connection points behind your tail...
view full answer...
- What Is the Tongue Weight Rating of the Buyers Products Adjustable Tri-Ball HitchThe tongue weight of the hitch balls on the Buyers Products Adjustable Tri-Ball Hitch part # 3371802225 is going to be 600 lbs for the 1-7/8" hitch ball, 750 lbs for the 2" hitch ball, and 1,000 lbs for the 2-5/16" hitch ball.
view full answer... - Recommendations for an Adjustable Ball Mount with 3 BallsWe have several 3-ball ball mounts. Curt # D900 is a popular option. Buyers Products makes a similar model, # 3371802225. It is most likely one of these two you are thinking of. But I also included a link to all of the 3-ball mounts that we carry and links to some video reviews.
view full answer... - Can Longer Shank Be Used With Buyer's Products 3371802225 Adjustable Ball Mount The longest shank we offer is part # EQ90-02-4600 from Equal-i-zer which is 18 inches long overall or 14 inches from the center of the hitch pin hole to the centers of the adjustment holes on the shank. As it sits, the center of the hitch pin hole to center of trailer ball hole on the # 3371802225 is 16 inches. If the # EQ90-02-4600 shank is used, that distance would be about 21-5/8. The series of height adjustment holes are spaced the same on the # EQ90-02-4600 shank, so It would work...
view full answer...
- In Need Of A 2-5/16" Hitch Ball For A 2006 Toyota TundraI can certainly point you in the right direction. Firstly, we suggest checking your owners manual and verifying that you can tow 6,000 lbs with your truck. If it is able to tow 6K or more then we can set you up. If you do not have a factory hitch, you can use the Curt class 3 hitch # C13180. This hitch can tow up to 6,000 lbs, so just enough for your horse trailer. As far as a ball mount and 2-5/16" ball I recommend using an adjustable ball mount like the bulletproof hitch # MD206. This...
view full answer... - Adjustable Height Setup for Lock N Roll Articulating Hitch SetupWhile the shank of your current Lock N Roll articulating hitch would fit into the hitch opening of the # 3371802225 we can't recommend you go that route as it was not intended for use in any other way aside from with the adjustable ball mount setup. Your best and safest solution would be the Lock N Roll Articulating Hitch part # 336VS503515. This gives you the height adjustability and since it's been tested there'd be no concern that it would be a dangerous setup.
view full answer... - Recommended Trailer Hitch for 2006 Honda CR-V to Tow Motorcycle TrailerThe Draw-Tite Max-Frame Trailer Hitch Receiver # 75690 referenced in your question is a great choice and is the hitch I recommend for your 2006 Honda CR-V. This is confirmed to fit your vehicle and will provide a 2 inch receiver opening with a 3,500 pound towing capacity. I do also recommend verifying the vehicle's towing capacity as listed in the owner's manual, as this will likely be the limiting factor. Based on the 19-21 inch hitch height of the trailer, you may simply need to use...
view full answer... - Recommended Adjustable Ball Mount with Long Shank for Back of Class C MotorhomeI'll start off by saying that in almost all cases, using a hitch extender will reduce your tongue weight by 50%, so your 350-lbs TW/3500-lbs towing capacity hitch is likely limited to 175-lbs TW and 1750-lbs towing. However, the Buyers Products # 3371802225 would likely be a good solution since it has 16" from the center of the hitch pin to the top of the hitch ball, so it will clear the 7" you've mentioned without issue. I really like that this ball mount comes with all 3 hitch ball sizes,...
view full answer... - Recommended Adjustable Ball Mount with 1-7/8 Inch Ball for 2018 Chevy ColoradoFor your 2018 Chevy Colorado, I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise # BWTS10038B. This ball mount comes with 2 hitch balls one of which is the 1-7/8 inch ball you need. It is adjustable in 1 inch increments so you can make sure your trailer rides level. This hitch also has a really nice stow-away feature for a clean look when not in use. I've attached a video to assist. I also recommend you use a hitch lock like # e98880 to deter theft and...
view full answer... - Recommended Ball Mount With Multiple Balls That Can Also Have Pintle HookI have another option for you, but there is not a pintle hook option for the Buyers Products Adjustable Tri-Ball Hitch - Solid Shank with Chrome Balls # 3371802225 you were looking at. Instead I recommend the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 16K # 325-GH-524 which includes a 2" hitch ball with a 12000lb trailer weight rating, a 2-5/16" hitch ball with a 16000lb trailer weight rating, and a pintle hook lock which can be placed over either...
view full answer... - Length of Buyers Products Replacement Tri-Balls # 3373020620 From Hitch Pin Center To End of HitchThe Buyers Products Replacement Tri-Balls # 3373020620 for Adjustable Tri-Ball Hitch # 3371802225 is 1" from the hitch pin center hole to the end of the hitch tube(see image). This is the same measurement for all the mounting holes as they are in line and not offset.
view full answer...
- Can Locking Pins be Used for the Buyers Products Adjustable Tri-Ball HitchYou can definitely purchase locking pins like the InfiniteRule Locking Pins # 34061775-D to lock both the adjustable ball mount and the shank for the Buyers Products Adjustable Tri-Ball Hitch # 3371802225. These all come keyed alike and I test fit them to verify that they work together with the Tri-Ball Hitch.
view full answer... - Selecting a Hitch Ball and Brake Controller for a 2007 Ford F-150 Towing a Car HaulerBefore selecting the appropriate hitch ball and ball mount, you will want to check the gross trailer weight, GTW, and tongue weight, TW, capacities of your 2007 Ford F-150 and your trailer hitch. If you are going to be towing a car hauler, then you will want a ball and mount with the highest possible GTW and TW that is compatible with your truck and trailer hitch. I would definitely recommend a 2-5/16 hitch ball with a 1-1/4 inch shank like the Curt Trailer Hitch Ball, part # 63840, and...
view full answer... - Recommended Towing Setup for 2005 Ford F-350 Transporting a Truck Camper and 30ft Boat TrailerYou might not need a hitch extender or weight distribution. It is possible that a long ball mount will have the length needed to provide clearance for towing the trailer. Ball mount # 40331 measures 9-1/4 inches from the center of the pin hole to the center of the ball hole. It is rated for 16,000 pounds gross trailer weight and it has a 3 inch rise or 4 inch drop. Another ball mount to consider is the Buyers Products # 3371802225. This ball mount will provide you 16 inches from center...
view full answer... - Will Adjustable Tri-Ball Hitch 3371802225 Fit With Tri-Ball Hitch and Hook 3371802208From your description it sounds like you are talking about the weldment that comes with the Buyers Products Adjustable Tri-Ball Hitch - Solid Shank # 3371802225 (see attached picture) which is part # 3373001727 and the Buyers Products Tri-Ball Hitch # 3371802208. I went out to the warehouse to see if these 2 parts are compatible with each other but found that the butt end of the Tri-Ball Hitch extended too far past the hitch pin hole so they won't fit together. I do have an alternative...
view full answer...
- Longest 3-Ball Adjustable Ball Mount For 2" Trailer Hitch ReceviersI may have a replacement option for you, but the Replacement Shank for Curt Adjustable Ball Mount # C45059 is the longest shank available that is confirmed to fit the Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches # D900. Depending on how much extra length you are needing, the Buyers Products Adjustable Tri-Ball Hitch - Solid Shank with Chrome Balls # 3371802225 will be 3/4" longer from the center of the hitch pin hole to the center of the hitch ball. I included videos for...
view full answer... - Availability of Adjustable Ball Mount w/ 1-7/8 and 2 Inch Trailer BallsMaxxTow doesn't offer an adjustable ball mount that uses a 1-7/8 and a 2 inch ball, but Buyers Products offers the # 3371802225 which offers a 1-7/8, 2 and a 2-5/16 inch trailer ball. With the 1-7/8 ball in use, the adjustable ball mount has a 6000 lb capacity, or an 7500 lb capacity with the 2 inch ball and a 10000 lb capacity with the 2-5/16 inch ball. The adjustable ball mount offers up to a 6 inch rise or drop.
view full answer... - Will Curt Shank Work as Replacement for Shank of Buyers Products Ball MountThe shank of the Buyers Products Adjustable Tri-Ball Hitch # 3371802225 and the Replacement Shank for Curt Adjustable Ball Mount # C45059 use the same 5/8" diameter holes and have the same 1-1/4" inch hole spacing so you can use the Curt shank as a replacement if you like. I have added a link below to a video review for you to check out as well of the Replacement Shank for Curt Adjustable Ball Mount # C45059.
view full answer... - How to Determine Correct Hitch Ball Size for a Fulton CouplerThe Fulton Fas-Lok Coupler # F222000301 does have the same 22 200 SAE Class 2 numbers that you referenced but that has to do with the testing as opposed to the hitch ball size. If you check out the picture that I attached you can see that the handle itself has 2" Ball engrave on it. Your coupler should have this on the handle or on top of the coupler part that sits directly on top of the hitch ball. If you still can't find it then you should be able to go to your local home improvement...
view full answer... - Is Shank On Fastway Self-Locking Adjustable 3-Ball Mount for 2-1/2 Inch Receiver a Single PieceThe Fastway Self-Locking Adjustable 3-Ball Mount # DTALBM6625-3S referenced in your question does feature a steel sleeve over the ball mount shaft that allows it to be used in a 2-1/2 inch receiver hitch. The sleeve cannot be removed and it does not compromise the strength or integrity of the ball mount itself. This unit includes three stainless steel hitch balls (1-7/8 inch, 2 inch and 2-5/16 inch) and has a tongue weight capacity of 1,000 pounds. I have attached a video demonstration...
view full answer... - Base Plates for 2016 Chevy Silverado 1500No, a ball mount will not work as a way to flat tow your 2016 Chevy Silverado, you will need to add base plates to your truck and then use a high/low adapter. I've linked the page below to your options to assist.
view full answer... - Adjustable Ball Mount with 1-7/8 and 2 Inch BallsWe do have some adjustable ball mounts that feature a 1-7/8 inch and 2 inch ball. We have Rapid Hitch # AM3411. We also have some with 3 balls (1-7/8, 2, and 2-5/16 inch) including # D900 and # 3371802225. I have included some links to videos for you.
view full answer... - Tri-Ball Adjustable Ball Mount for a 2014 Jeep Grand Cherokee Overland with 20 Inch WheelsSince you are towing multiple trailers with different heights then going with an adjustable mount is the way to go. Its also good to have because you never know what you might be towing in the future. We have a few different tri-ball adjustable ball mounts that you could use. Curt ball mount # D900 that you referenced is one of them. Buyers Products makes a similar ball mount, # 3371802225. The Curt has a 4" rise and 5-3/4" drop while the Buyers Products has a 6" rise and drop. Both are...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Installed by:
Andrew K
Installed by:
Cole B
Edited by:
Lindsey S
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Matthew E
Written by:
Kristina F
Video by:
Rick G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rocky
1/5/2023
Excellent. My Ford F-350 4x4 is exceptionally high. The hitch is adjustable enough to accommodate whatever trailer I hook up to it.