Curt Multi-Ball Adjustable Ball Mount Test Course Video

The issue with hitch extenders is that they end up cutting the capacity of the hitch they are installed in by 50 percent due to the extra length and movement in the hitch. So with that in mind there isn't a hitch extender we can offer that will…

I produced a short video and added dimensions to a photo for you so that you could measure and be sure the CURT Multi-Ball Adjustable Ball Mount, #D900, would work on your 2005 Jeep Liberty with rear mounted spare tire. The most critical measurements…

Since hitch extenders like the 11" Roadmaster #RM-071 you show in your pictures reduces the weight rating of the hitch by 50% we typically recommend avoiding them as a solution. For your application we have ball mounts with extended shanks that…

I'll start off by saying that in almost all cases, using a hitch extender will reduce your tongue weight by 50%, so your 350-lbs TW/3500-lbs towing capacity hitch is likely limited to 175-lbs TW and 1750-lbs towing. However, the Buyers Products…

The Buyers Products Replacement Tri-Balls #3373020620 for Adjustable Tri-Ball Hitch #3371802225 is 1" from the hitch pin center hole to the end of the hitch tube(see image). This is the same measurement for all the mounting holes as they are in…

The Buyers Products Adjustable Tri-Ball Hitch part #3371802225 and the Curt Multi-Ball Adjustable Ball Mount part #D900 are both very similar. The main difference as you mentioned is that the Buyers Products Ball Mount has a longer shank which then…

The Draw-Tite Adjustable Ball Mount with Sway-Control Tab #7390 measures 11-3/4-inches from its hitch pin hole to the center of the ball hole. I confirmed with my contact there that there is no longer version offered. MaxxTow Adjustable-Height Ball…

From the base of the #C40047 up to the top of the ball measures 4.091 inches. This is about 1-3/8 inches taller than a standard ball.

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

What a cool set up! Bad news on the extender front none of my extenders are rated for anything close to that. I totally get the reasoning and would also want to keep them separated. As another option you can use the Curt Multi-Ball Adjustable Ball…

When determining the amount of rise or drop you will need on the ball mount for your towing setup, you just need to take a couple simple measurements. The first, which you have already taken, is from the ground to the top of the trailer hitch…

For a 2-inch ball mount rated for 12,000-lbs that has 8-inches of drop we offer two options you can see on the linked page. Part #4283 from Draw-Tite provides 7-inches of rise or 8-inches of drop, as does Curt #C45448. Both take a hitch ball, sold…