Curt Commercial Duty Trailer Hitch Installation - 2019 Ram 3500 Video

The measurement of the Replacement Hitch Ball for B&W Turnoverball Underbed Gooseneck Hitches - 2-5/16" #BWGNXA2000 is 2-1/2 inches by 2-1/2 inches by 4 inches. The ball on top of this shank is 4-1/16 inches tall. The hitch pin hole is…

Looks like you have a service body truck/van based on your pictures. There are only multi-fit hitches that will fit that type of vehicle. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…

I have a couple of options for hitches for your 2023 Ram 5500 depending on whether or not you want a 2" receiver or a 2-1/2" receiver. I have listed both options below: 2" Hitch - Curt Trailer Hitch Receiver item #C15400 2-1/2"…

A lot of the trailer hitches available for the 2013 Chevrolet Silverado fit a span of over multiple years as long as the generation does not change. For example the etrailer.com Trailer Hitch Receiver part #e98849 fits 1999 - 2013 Chevrolet Silverado…

The factory puck system is not an aftermarket option so there is no way to obtain one on your 2019 Ram 3500, and there isn't an underbed option, but you can still add a 5th wheel hitch to your truck. You will need above-bed rails to do so, and…

I was able to get a dimension sheet from my contact at Curt for the Curt Hitch part #C15800 that you referenced. See attached pic. I also attached a set of the installation instructions for this hitch.

34 inch frame hitch fits are for the cab and chassis model trucks. The part #C15312 does not fit cab and chassis model trucks so it would not be a fit for a 34 inch frame. The part #C15800 is an example of a Curt hitch that does fit a 34 inch wide…

Trailer manufacturers don't usually keep a record of parts like these that they install at the factory, so I cannot be sure as to the exact length of the shackle strap that would have come originally on your trailer. With this in mind, a 3-1/8…

If the shackle straps are within a 1/2" of what you normally had, say the 2-5/8" #115052 to 3-1/8" #TRSL313, you should be okay to install them. Just make sure that all of your shackle straps match though. If you are using the longer…

In order to install Curt trailer hitch #C15800 on your 2012 Dodge Ram 4500 cab and chassis model you will have to drill into the frame because, like you have said, there are no holes in the frame already. The rivet that is in the rear most part of…

I believe you meant to type 34 inch wide frame as that is the standard width for the cab and chassis trucks from outside to outside. I really like the Curt hitch part #C15800 as it is a fit for your 2006 Chevy Silverado 3500 cab and chassis and has…

On your 2007 Chevrolet Silverado Classic 2500HD truck, we have couple of heavy-duty Class V trailer hitches that I recommend. The Draw-Tite Class V Hitch, #DT45517, is a class V hitch with the 2-1/2 inch receiver opening. This hitch has a Gross…