Brophy Ball Mounts - Fixed Ball Mount - EA40 Review Video

I can tell you how far the Curt #C15400 extends out from the frame and you can use that to determine the measurement to the end of the service body. We don't have information on the RKI S6080 or a way to determine that distance otherwise. The…

The mounting flanges of the Curt hitch part #C15800 are 11.6 inches in length. This is a fit for your 2022 Chevy Silverado 2500 cab and chassis model.

The Curt Trailer Hitch Receiver part #C15400 and the Curt Trailer Hitch Receiver part #C15800 are the exact same trailer hitch save for one has a 2" receiver tube opening and the other a 2-1/2" receiver tube opening. The dimensional drawing…

The Curt Class III Trailer Hitch Receiver #13138 is certainly the hitch I recommend for your 2004 Ford Ranger so that the spare tire can remain stored under the vehicle. To choose the correct ball mount for your truck and trailer, it is best to…

We do have some anti-rattle locking pins that will fit the Convert-A-Ball Cushioned Ball Mount #AMSC4, but the Lets Go Aero Anti-Rattle Device and Lock #63232 is not compatible as it needs a hollow shank to fit properly. You can purchase separate…

Yes, on a ball mount that can be used in both the rise or drop position such as #AMSC4 that you referenced, the capacity remains the same. For this ball mount it is rated for 10,000 pounds gross trailer weight and 2,000 pounds tongue weight. I have…

To help alleviate the back and forth chucking you are experiencing with your 2 inch receiver there are a couple of things I recommend doing. First is to use a cushioned ball mount, the Convert-A-Ball, which is designed to reduce this type of movement…

Brophy hitch ball #SC23-C is made overseas. For a stainless steel option that is made in the US you would have to go to an interchangeable set, #903B. I have linked a video review of this set for you.

You will need a 1-1/2" wrench like part #C20001 in order to install the nut on the 2" Hitch Ball part #63845. A 1-7/8" wrench would be much too large.

Curt hitch ball #40038 has a 1 inch diameter shank. For Curt balls with 3/4 or 1 inch diameter shanks you would use wrench #C20001. The nut on that ball should use the 1-1/2 inch end of the wrench. You could also use a large crescent wrench if you…

What you're experiencing is fairly common but certainly fixable. The exhaust system at the rear of the car is attached to the vehicle using rubber isolators and easily bendable exhaust hangers. Because of this, the actual position of the exhaust…

The anti-rattle adapter I recommend is the No-Rattle Trailer Hitch Wedge, part #MPG908. This will work for 1-1/4 inch and 2 inch receivers and is designed to insert into the small gap that may exist on your receiver. You then tighten it up after it…