Curt Ball Mounts - Fixed Ball Mount - C45338 Review Video

It sounds like you're looking for a completely solid shank ball mount for a 2" hitch that also has an 8" drop; I am not aware of anything like this being on the market since there are some challenges with manufacturing a solid ball…

Thank you for your recent purchase including an extra-long Curt 2-inch ball mount #D-26. This particular ball mount offers a choice of 3/4-inches of rise or 2-inches of drop relative to the hitch receiver opening. If you need an extra-long ball mount…

The towing and tongue weight capacity of the Curt Ball Mount #C45338 does not change if you use it in the rise position; it has a tongue weight capacity of 1,000 lbs and towing capacity of 10,000 lbs no matter if you use it to get 8-1/4 inches of…

Thank you for the measurement, the correct fit for your 2010 Toyota Sequoia is going to be the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension #CSS-1168. Having installed a few of these myself I've found it to be much easier if…

Since the Curt Hi Rise Hitch ball part #C40034 is designed for a 1 inch diameter hitch ball hole you'd need the hitch ball bushing part #58184 to use it with the Curt ball mount #C45338 that you have.

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

SumoSprings Custom Helper Springs for Coil Spring Suspension #CSS-1168R are intended for the 4WD version of the 2015 Ford Expedition. If your 4-door XLT is 2WD you may still be able to use these in its rear coil springs if the space between the coils…

If the surge brakes on your trailer do not have an electric reverse lockout then you could just tape up all of the wires that you didn't need of the #30717 and you would be good to go. If the trailer does have an electric reverse lockout you…

We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450 foot pounds…

For the Yakima Rack and Roll Trailer part #Y08107 the height from the ground to the top of the inside of the coupler where the ball sits is 22 inches so then from the bottom of the coupler lip to the ground measures 20 inches when the trailer sits…

I assume you are asking about the height of the trailer with wheels removed when storing the Yakima Rack and Roll Trailer, part #Y08107. I took a couple measurements of the trailer for you. The arm that holds the shock can be swiveled up when the…

Yes, the hands free liftgate feature on your 2018 Nissan Pathfinder will still be functional with the Draw-Tite Max-Frame Trailer Hitch Receiver part #76031 installed. However, in order to activate this feature you will need to place your foot on…