Customers compare 3481783 to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
There may be a solution for you though the Traffic Cone Holder for E-Track or Rack'em Spare Tire Holder #RA-26 does not have a specific weight rating for one of the brackets. There are a couple options for you to consider like the CargoSmart…
view full answer...The CargoSmart Horizontal or Vertical X-Track - Matte Black - Steel - 667 lbs - 5' Long #3481788 will attach directly to the vertical metal frame on your trailer. You will use Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc…
view full answer...The wood strips on your trailer appear to be in place only to allow objects to slide along the wall and to not damage the interior plywood on the walls. To be safe you will want to verify with the trailer manufacturer that there is no structural…
view full answer...I didn't receive your photos, but the manner in which you attach the e-track to your trailer deck will completely depend on what the deck is constructed of and where exactly on the deck you'll be placing the e-track. Without knowing any…
view full answer...Zinc plated screws are going to be the best option for use with aluminum to resist galvanic corrosion. This corrosion you are referring to is from two dissimilar metals reacting so you want to use the most similar metals when installing your E-track…
view full answer...I have a hardware solution for you. While the CargoSmart X-Track Cargo Organizer #3481788-C does not come with screws, we do carry ones that will work great with the organizer. For wood screws, I recommend the Snap-Loc E-Track Wood Screws #SL49FR. If…
view full answer...Tonneau covers and ladder racks can be compatible with each other when they do not use the same mounting points on the truck bed rails. Both tonneau covers and ladder racks can mount either inside the bed rails or on top of them. As an example, the…
view full answer...If you have a 2017 Toyota Tacoma with the tow package/factory 7-way yes it is pre-wired for a brake controller. For a brake controller I recommend the Prodigy P3 Brake Controller part #90195. This is our best selling brake controller because of how…
view full answer...Yes, the Erickson ATV E-Track Tie-Downs #EM98CV includes wheels chocks and straps for four wheels and will accommodate vehicles weighing in at 3000lb maximum with tires between 10" and 30" in diameter. Since your 2006 Kawasaki Mule 3010…
view full answer...As long as your 5 flat pin supplies brake signals from the brake controller you will be good to go. The purple (reverse) and black (12 volt) wires are not necessary and can be tied up out of the way. You will also need a 7 to 5 way adapter like…
view full answer...For an end cap for the horizontal e-track the part #ET8730 would give the track a more finished look. You can mount the E-Track Trailer Cargo Control, #EM59150, using wood screws if the mounting surface is wood. If it is sheet metal, I would use…
view full answer...Erickson E-Track should be secured to the mounting surface with no fewer than 2 fasteners per linear foot per side, so for example a 3-foot section would need no less than 8 fasteners. The type and length of fastener depends on the mounting surface…
view full answer...