CargoSmart E-Track or X-Track System Shelf Track Brackets Review Video

I checked with Erickson and their Removable Motorcycle Wheel Chock item #EM07506 does not have a weight rating. It is made of steel and works with bikes that have up to 6" tires. So long as your Honda and Kawasaki do not have wider tires…

Since your 5' x 10' traler has a V-nose, we recommend going with the Adco SFS AquaShed Trailer Cover For Trailers up to 12' Long #290-46002. This will allow a bit of extra room for the V-nose. With the included straps on the…

There may be a solution for you though the Traffic Cone Holder for E-Track or Rack'em Spare Tire Holder #RA-26 does not have a specific weight rating for one of the brackets. There are a couple options for you to consider like the…

We can get your 2019 Ford F-450 set up with camper tie-downs for a truck camper, and what you will need is the following, so long as you A) have the factory trailer hitch and B) do NOT have factory flip-out steps that are mounted under the truck…

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck…

The Erickson Horizontal E-Track, part #E19148 has 1/4 inch diameter mounting holes spaced 2 inches apart. The screws you use should be at least long enough to go 3/4 inch into the wood you are mounting the track to. The more screws you use the more…

Yes, the Snap Loc E-tracks like the part #SLSS you referenced is a fit with other brands of E-track as they are all made to the same dimensions for the most part. I attached a review video for more info for you to check out as well.

A lot of covers, like the Adco SFS AquaShed Cover for Bumper Pull Trailer - Up to 14' Long - Gray #290-46003 you purchased, will typically have some type of reinforcement at those common tear points but if your trailer has sharp edges then it…

I have a solution for you but the Buyers Products Hitch Plate for Pintle Mounting item #3371809030B only fits 1999 and newer Ford F-350's. For your 1986 F-350 Cab and Chassis you will want the Buyers Products Flatbed/Flatbed Dump Hitch Plate…

Though there isn't anything specifically for a 6 x 10 v-nose enclosed trailer, we have something that may work for you. Since the v-nose extends the length somewhat, a cover for a bumper-pull horse trailer up to 12 feet could work, depending on…

I went out to the warehouse and found that the mounting bracket for the Camco RV 360-Degree Awning Roller w/ Screen Door Slide #CAM42005 measures 3-1/16" high x 1-1/16" wide with mounting holes 7/8" apart on center. The ball has about…

The Erickson Horizontal E-Track #E19148 can be cut to length for your application. We suggest using a metal saw or cutting wheel and grinder to cut the tracks to the needed length.