Mounting Hardware for Tow-Rax Removable Wheel Chock - Metal Floor

See what our Experts say about this Tow-Rax Accessories and Parts

• Replacement Mounting Hardware for Tow Rax Motorcycle Chock # TWSPWM
  Yes, for replacement hardware for the Tow Rax Motorcycle Chock part # TWSPWM you'd want the part # TWSPWFKM.
  view full answer...
• What do You Recommend for Transporting My 88-Pound E-Bike on a 2018 Subaru Outback?
  If you are looking for a way to transport your 88-pound Ariel Rider Grizzly, we do not have a standard bike rack that can accommodate that weight. However, the best and easiest route is to use a dirt bike/moped carrier like the Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp # UF48-979033. This carrier comes with an inside track width of 5 inches wide, so it is plenty of room for your 4-inch wide tires. It also comes with an included ramp to make loading a piece of cake. For a locking...
  view full answer...
• Hardware for Tow-Rax Floor Jack Mount
  Good news, since the bracket requires you to drill your own holes wherever you may need them, the # TWSPWFKM hardware kit will work as long as you have a metal floor. You will need a 7/16 inch drill bit to drill the initial hole. Alternatively, if you have a wood floor on your trailer you could use the # TWSPWFKW with a 3/8 inch drill bit.
  view full answer...
• Recommended Wheel Chock for Suzuki Burgman Scooters
  The 4-3/4 inch wide front tires of your scooters would be perfectly compatible with the Tow-Rax # TWSPWC wheel chock. The chock includes hardware for mounting the chock to a wood floor, for a metal floor you'd need the # TWSPWFKM mounting hardware. If you don't already have them, you'll also need some ratchet straps to hold the scooters in place. Ones set of # 05605 straps per scooter would have plenty to capacity to keep the scooters locked into position.
  view full answer...
• Do Fasteners On Wheel Chock, # TWSPWM, Need A Special Tool And Are Extra Fasteners Available
  On the Motorcycle Wheel Chock, # TWSPWM, no special tool is needed to install the anchors to the wooden trailer floor, just a 5/16 inch Allen wrench. The anchors will be recessed into the floor, but the screws that the wheel chock attaches to are above the floor. To install, you will use the wheel chock as a template to mark where you want the holes to be drilled on the trailer floor. Then, you will drill three holes with a 7/16 inch drill bit. After the holes are drilled then you can...
  view full answer...
• How Can I Transport My 320 Sport Bike on My 2013 Hyundai Santa Fe?
  I have a way for you to safely transport your dual sport bike on your vehicle. I went ahead and looked up the specs for your 2013 Hyundai Santa Fe, and it has a maximum gross towing weight capacity of 2,800 pounds. If this is the case, the maximum tongue weight capacity of your vehicle is 280 pounds. With this tongue weight capacity, you cannot safely mount via a hitch carrier that requires tongue weight. This is because no matter what hitch you use, your sport bike exceeds that 280 tongue...
  view full answer...
• Availability of Removable Wheel Chock for Dirt Bike
  The MaxxTow Adjustable Wheel Chock (DISCONTINUED) MT70075 is not removable but we do have motorcycle/dirt bike wheel chocks that are removable. The Tow-Rax Removable Wheel Chock # TWSPWM in Black or # TWSPWC in Chrome is removable and can accommodate tires that are up to 6-1/2" wide. These come with wood screws but if you have a metal floor then you can use the mounting hardware # TWSPWFKM. All of our adjustable wheel chocks are meant to be mounted permanently so if you are really wanting...
  view full answer...
• Availability of Removable Wheel Chocks For ATVs To Mount on Trailer Floor
  The motorcycle wheel chocks we offer, such as the # TWSPWFKM are compatible with tires up to 6-1/2 inches wide, so they wouldn't be a good alternative for your ATV. We do have some alternatives that could work well for you though. The # PK-WTD from Pack'Em includes 2 chocks, the strap and mounting hardware. The chocks are permanently mounted, but they only sit about 1-5/8 inches off the floor, so they won't get in the way. Using E-Track like part # E19148 for a 5 foot length, # EM59150...
  view full answer...
• Will Tow-Rax Mounting Hardware For Wheel Chock Withstand The Weight Of A Harley
  Yes, the mounting hardware part # TWSPWFKM is designed to mount Tow-Rax motorcycle chocks like part # TWSPWC onto a metal floor. The hardware is designed to withstand the weight of a motorcycle such as your Harley but I contacted Tow-Rax and they could not give me an official weight rating. I have attached a video for your reference.
  view full answer...
• Recommended Removable Wheel Chock for 2016 Indian Vintage Motorcycle
  Great news! I found that the width of your 2016 Indian Vintage's front tire is just over 5 inches. This will work great with the removable Tow-Rax Wheel Chocks. Depending on what type of trailer floor you have we off the wood screws with chock in black # TWSPWM or chrome # TWSPWC. We also have a chrome with multi-surface mounting kit for metal or wood floors # TWSPWC3BT. Any of the Tow-Rax Wheel Chocks can use the metal floor hardware kit # TWSPWFKM sold separately. I have linked a...
  view full answer...

Do you have a question about this Accessories and Part?